AutoCAD Civil 3D Customization

AutoCAD Civil 3D Customization

Reply
Contributor mjm
Contributor
mjm
Posts: 21
Registered: ‎04-27-2012
Message 1 of 5 (227 Views)
Accepted Solution

vcedit?

227 Views, 4 Replies
04-01-2014 09:33 AM

Where can I get information on what contents are in http://www.autodesk.com/land/civil/vcedit

This is a reference in the xsl reporting in Civil 3D and is referenced over and over.  I am attempting to include PI's in the Alignment and Curve report.

Thanks in advance.

I have exported the XML and found that the only information for the PI is the Northing and Easting.  I am going to see if I can calculate the station and offset using that data.

 

Thanks.

ADN Support Specialist
Partha.Sarkar
Posts: 543
Registered: ‎06-09-2009
Message 2 of 5 (209 Views)

Re: vcedit?

04-01-2014 09:41 PM in reply to: mjm

Hi,

 

This links seems to be not working.

Where did you see the reference of this link ?

 

Thanks,

 



Partha Sarkar
Developer Technical Services
Autodesk Developer Network

Contributor mjm
Contributor
mjm
Posts: 21
Registered: ‎04-27-2012
Message 3 of 5 (192 Views)

Re: vcedit?

04-02-2014 08:48 AM in reply to: Partha.Sarkar

So I figured out that the reference is an xml namespace.  Crazy definition here.

<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0"
	xmlns:lx="http://www.landxml.org/schema/LandXML-1.2"
	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
	xmlns:msxsl="urn:schemas-microsoft-com:xslt"
	xmlns:landUtils="http://www.autodesk.com/land/civil/vcedit"
	xmlns:lxml="urn:lx_utils">

 So the xsl sheets make calls such as:

<xsl:value-of select="landUtils:FormatStation(string($startStation), string($Alignment.Station.Display), string($Alignment.Station.precision), string($Alignment.Station.rounding))"/>

 The biggest problem I have right now is the XML document seems to be created and deleted in an unknown temporary location.  I don't know what data is being delivered with the XML doc and how to reference it. 

 

I am attempting to add in the horizontal curve PI to the Alignment Station and Curve report.

*Expert Elite*
Civil3DReminders.com
Posts: 2,522
Registered: ‎10-13-2005
Message 4 of 5 (178 Views)

Re: vcedit?

04-03-2014 11:21 AM in reply to: mjm

Yep, if you don't have a strong javascript/XLS creation background it can be difficult to navigate the files. Last time I looked into a IDE environment I couldn't get it to load and wasn't able to find the IDE environment Autodesk used to create them. If we knew it would be potentially easier to navigate and find the information to add since the reports utilize a bunch of files. If you want to know what's in the XML file you can export one out yourself and take a look inside. 

Civil Reminders
http://blog.civil3dreminders.com/
http://www.CivilReminders.com/
Contributor mjm
Contributor
mjm
Posts: 21
Registered: ‎04-27-2012
Message 5 of 5 (163 Views)

Re: vcedit?

04-09-2014 09:44 AM in reply to: Civil3DReminders.com

I have exported the XML and found that the only information for the PI is the Northing and Easting.  I am going to see if I can calculate the station and offset using that data.

 

Thanks.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.