AutoCAD Civil 3D Customization

AutoCAD Civil 3D Customization

Reply
*Expert Elite*
neilyj
Posts: 3,791
Registered: ‎08-01-2008
Message 1 of 8 (240 Views)

Request for C# code to be compiled

240 Views, 7 Replies
10-27-2011 06:19 AM

Is someone able to take the code in the following post and convert to DLL please??

 

http://through-the-interface.typepad.com/through_the_interface/2011/10/creating-a-legend-of-autocad-...

neilyj
(No connection with Autodesk other than using the products in the real world)


IDSP Premium 2015 (mainly Civil 3D 2015 UKIE & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 240Gb SSD, 1Tb HDD
32Gb Ram Intel Xeon CPU E5-2650 v2 @ 2.6GHz (32 CPUs), ~2.6GHz
NVIDIA Quadro K4000, Dual 27" Monitor, Dell T5610
*Expert Elite*
AllenJessup
Posts: 5,942
Registered: ‎05-21-2003
Message 2 of 8 (237 Views)

Re: Request for C# code to be compiled

10-27-2011 07:02 AM in reply to: neilyj

Well. That's certainly beyond my abilities. However, if you have a copy of Land Desktop Companion running, you can use Make Block Chart.

 

BC.png

 

Allen

Product Support
AlmasSuljevic
Posts: 779
Registered: ‎08-11-2010
Message 3 of 8 (204 Views)

Re: Request for C# code to be compiled

10-28-2011 06:57 AM in reply to: neilyj

Your post is moved to customization discussion board as you may find more help there. http://forums.autodesk.com/t5/AutoCAD-Civil-3D-Customization/Request-for-C-code-to-be-compiled/td-p/...



Almas Suljevic
Product Support Specialist
Autodesk Global Subscription and Support
Autodesk, Inc.

Please click on "Accept as Solution" if post helped you resolve the issue.
Distinguished Mentor
Civil3DReminders
Posts: 910
Registered: ‎03-24-2009
Message 4 of 8 (195 Views)

Re: Request for C# code to be compiled

10-28-2011 11:43 AM in reply to: neilyj

Here you go.

*Expert Elite*
neilyj
Posts: 3,791
Registered: ‎08-01-2008
Message 5 of 8 (158 Views)

Re: Request for C# code to be compiled

11-03-2011 12:48 PM in reply to: neilyj

Thanks for this -it just crashes civil 3D unfortunately...:smileysad:

neilyj
(No connection with Autodesk other than using the products in the real world)


IDSP Premium 2015 (mainly Civil 3D 2015 UKIE & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 240Gb SSD, 1Tb HDD
32Gb Ram Intel Xeon CPU E5-2650 v2 @ 2.6GHz (32 CPUs), ~2.6GHz
NVIDIA Quadro K4000, Dual 27" Monitor, Dell T5610
Active Contributor
christopher
Posts: 30
Registered: ‎07-13-2011
Message 6 of 8 (154 Views)

Re: Request for C# code to be compiled

11-03-2011 12:57 PM in reply to: neilyj

At what stage of the program running does it crash it?

*Expert Elite*
neilyj
Posts: 3,791
Registered: ‎08-01-2008
Message 7 of 8 (145 Views)

Re: Request for C# code to be compiled

11-04-2011 07:57 AM in reply to: neilyj

I'll qualify that statement - C3D goes into Not Responding mode and I stopped it after 5 minutes.

 

I then retried with 3 very small simple drawings and the table was created but the cells were not populated with anything

neilyj
(No connection with Autodesk other than using the products in the real world)


IDSP Premium 2015 (mainly Civil 3D 2015 UKIE & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 240Gb SSD, 1Tb HDD
32Gb Ram Intel Xeon CPU E5-2650 v2 @ 2.6GHz (32 CPUs), ~2.6GHz
NVIDIA Quadro K4000, Dual 27" Monitor, Dell T5610
Distinguished Mentor
Civil3DReminders
Posts: 910
Registered: ‎03-24-2009
Message 8 of 8 (138 Views)

Re: Request for C# code to be compiled

11-04-2011 09:23 AM in reply to: neilyj

You might want to try the SincPac with it's Legend Builder: http://quuxsoft.com/SincpacC3D_Help/SP_LegendBuilder.htm I haven't used it, but it kind of kills any desires I would have to make Kean's program work better.

 

Christopher

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.