AutoCAD Civil 3D Customization

AutoCAD Civil 3D Customization

Reply
Distinguished Contributor
paul.m.graf
Posts: 223
Registered: ‎09-02-2005
Message 1 of 20 (550 Views)

Parts Builder tutorial: Outside Drop Manhole

550 Views, 19 Replies
10-30-2012 12:35 PM

I tried posting this question on the other Civil 3D forum, so forgive me for double posting. I am desperate since I used a days worth of work doing the Parts Builder tutorial for The Outside Drop Manhole. If I can get this custom structure to work properly  I can justify this I time spent to my boss.

 

 

Has anyone sucessfully created the outside drop manhole that is part of the Civil 3d part builder tutorial? I've worked my way thru this tutorial, but I am not sure I did it correctly. When I add this part to my profile view I do not see the outside drop pipe & elbow.  I tried rotating the structure thinking the part is not orientated corrrectly to be seen in the view, but that does not seem to be the case. If I display the part style as solid I can see the outside drop pipe & elbow, but not as If i display part as boundary.  I tried the tutorial twice, but no luck. Part Builder can be a big headache. Somebody else must have gone thru this tutorial and have gotten this to work.

 

C3d 2012, windows 7 64 bit, updated service pack, etc.

 

PG

ADN Support Specialist
Partha.Sarkar
Posts: 543
Registered: ‎06-09-2009
Message 2 of 20 (537 Views)

Re: Parts Builder tutorial: Outside Drop Manhole

10-31-2012 07:14 AM in reply to: paul.m.graf

Hi PG,

 

I am asking my colleagues to help you here. Please wait to see if somebody comes back with their suggestion.

 

Thanks,

 



Partha Sarkar
Developer Technical Services
Autodesk Developer Network

Distinguished Contributor
paul.m.graf
Posts: 223
Registered: ‎09-02-2005
Message 3 of 20 (527 Views)

Re: Parts Builder tutorial: Outside Drop Manhole

10-31-2012 07:50 AM in reply to: Partha.Sarkar

Thank you.. Here is another question about this custom structure. Will outcoming pipe automatically be connected to the outside drop pipe of this custom structure?

 

PG

Product Support
SethHall
Posts: 723
Registered: ‎02-08-2010
Message 4 of 20 (516 Views)

Re: Parts Builder tutorial: Outside Drop Manhole

11-01-2012 09:23 AM in reply to: paul.m.graf

Hi Paul-

 

Actually I think this is a style issue rather than a part builder issue. You mention that when displaying as a solid it displays corectly, but as a boundary it does not. I think the part is created correctly, its just the boundary option that is not working as expected. For now can you just use the solid option to display the part?



Seth Hall
Product Support
GCSO - CSS - FTS
Autodesk, Inc.


Being Civil
Being Civil Twitter
Being Civil Facebook







Distinguished Contributor
paul.m.graf
Posts: 223
Registered: ‎09-02-2005
Message 5 of 20 (512 Views)

Re: Parts Builder tutorial: Outside Drop Manhole

11-01-2012 10:41 AM in reply to: SethHall

Displaying as a solid won't work in this case. This won't meet  local sewer agency cad standards. Can the outside drop pipe be adjusted to connect to the outgoing pipe with the structure as defined in the tutorial? How paramatric is this part?

 

I am still hoping I just didn't follow the direction on the tutrial correctly. It's hard to spot a mistake when you barely understand whats going on in the part builder envoirment.

 

here is a snippit of my part

Capture.PNG

 

I can send you pmy parts catalog if that would be helpful.

Distinguished Contributor
paul.m.graf
Posts: 223
Registered: ‎09-02-2005
Message 6 of 20 (508 Views)

Re: Parts Builder tutorial: Outside Drop Manhole

11-02-2012 08:53 AM in reply to: SethHall

Seth,

 

I did notice that maybe a possible mistake in the tutorial  - Exercise 2: Defining the Manhole Geometry

Capture2.PNG

 

Why is FTh listed twice? Should there actaully be another variable listed?  Is there anyone at Autodesk that is famiilar with this exercise?

 

Thanks,

 

PG

Product Support
SethHall
Posts: 723
Registered: ‎02-08-2010
Message 7 of 20 (505 Views)

Re: Parts Builder tutorial: Outside Drop Manhole

11-02-2012 09:04 AM in reply to: paul.m.graf

Unfortunately I do not know who wrote these tutorials as they are now several years old. The double Fth may be a mistake, but the fact that it looks fine as a solid leads me to belive that this is constructed correctly. Can you post a screen cap of the structure displayed as a solid?

 



Seth Hall
Product Support
GCSO - CSS - FTS
Autodesk, Inc.


Being Civil
Being Civil Twitter
Being Civil Facebook







Distinguished Contributor
paul.m.graf
Posts: 223
Registered: ‎09-02-2005
Message 8 of 20 (502 Views)

Re: Parts Builder tutorial: Outside Drop Manhole

11-02-2012 09:12 AM in reply to: SethHall

I posted an image of the part displayed as a solid yesterday in this thread. Can you see it? If not I'll try it again.

Product Support
SethHall
Posts: 723
Registered: ‎02-08-2010
Message 9 of 20 (498 Views)

Re: Parts Builder tutorial: Outside Drop Manhole

11-02-2012 11:23 AM in reply to: paul.m.graf

I am sorry... I must have meant boundary. Don't know what I was thinking.



Seth Hall
Product Support
GCSO - CSS - FTS
Autodesk, Inc.


Being Civil
Being Civil Twitter
Being Civil Facebook







Distinguished Contributor
paul.m.graf
Posts: 223
Registered: ‎09-02-2005
Message 10 of 20 (493 Views)

Re: Parts Builder tutorial: Outside Drop Manhole

11-02-2012 11:58 AM in reply to: SethHall

No Problem. I wish I understood parts builder better. I keep trying to tell myself not to give up, keep at it. It's hard to get PB answers on these forums and I understand why.

 

Here is what the part looks like as a boundary. Notice the outside pipe does not display. In PB enviorment the Part is configured at a "Cylider Shape". Does this mean the part can only be diplayed as a cylinder and unable to show the outeside pipes?

 

Capture3.PNG

 

 

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.