AutoCAD Civil 3D Customization

AutoCAD Civil 3D Customization

Reply
Active Member
planetcad
Posts: 9
Registered: ‎01-17-2013
Message 1 of 7 (302 Views)
Accepted Solution

CUI and Workspace 101

302 Views, 6 Replies
01-21-2013 08:30 AM
 What is the simplest, most effective way to mange a "main" cui globally, while allowing users to sustain their own workspace environment? In other words, I wish to globally administer the CUI by periodically adding various corporate settings (e.g., custom menus, ribbons, commands, etc). At the same time, I want each user to be allowed to keep their personal Workspace environment settings as desired. Is this possible?

Yes, this is possible. I don't have the Autodesk University class number handy, but there are more then one class handout available that outlines the steps to accomplish what you are after. 

Active Contributor
christopher
Posts: 30
Registered: ‎07-13-2011
Message 2 of 7 (298 Views)

Re: CUI and Workspace 101

01-21-2013 09:10 AM in reply to: planetcad

Yes, this is possible. I don't have the Autodesk University class number handy, but there are more then one class handout available that outlines the steps to accomplish what you are after. 

Active Member
planetcad
Posts: 9
Registered: ‎01-17-2013
Message 3 of 7 (292 Views)

Re: CUI and Workspace 101

01-21-2013 10:14 AM in reply to: christopher

I went to the AU class lists and in-fact did find a couple (lengthy) handouts on the topic. I was hoping for a quick, concise answer to my question (I know, wishful thinking right?). Looks like I have some homework to do! Thanks for pointing me toward a good starting place Christopher!

Active Contributor
christopher
Posts: 30
Registered: ‎07-13-2011
Message 4 of 7 (290 Views)

Re: CUI and Workspace 101

01-21-2013 10:17 AM in reply to: planetcad

Yeah, the process wasn't as straight forward as I wanted either. I guess if it was then I wouldn't have been hired to do it. So I guess there was an upside for me on the complexity. 

Distinguished Mentor
andrewpuller3811
Posts: 777
Registered: ‎07-30-2008
Message 5 of 7 (279 Views)

Re: CUI and Workspace 101

01-21-2013 06:12 PM in reply to: planetcad

Try the 2009 class AU222-1 A Working Enterprise CUI in Front of Your Eyes by Robert Bell.

 

It's a good step by step guide.

 

But as you said, there is more then one and you are best looking over a few to see different approaches and views.

If this fixed your issue, click on "Accept as Solution"

Andrew Puller
Maitland, NSW, Australia
Windows 7 Enterprise 64bit
Intel core i7 2600 @ 3.40 GHz with 16GB Ram
Civil 3d 2013 64bit
Active Member
planetcad
Posts: 9
Registered: ‎01-17-2013
Message 6 of 7 (266 Views)

Re: CUI and Workspace 101

01-22-2013 08:30 AM in reply to: andrewpuller3811

The 2009 AU documents are no longer posted on the AU class site. I was able to find 3 other doc's from 2010-2012. These should be enough to help me get waht I need. But, thanks anyway!

*Expert Elite*
Civil3DReminders.com
Posts: 2,522
Registered: ‎10-13-2005
Message 7 of 7 (256 Views)

Re: CUI and Workspace 101

01-22-2013 11:13 AM in reply to: planetcad

Here's a link to the handout: http://aucache.autodesk.com/au2009/sessions/5375/AU09_SpeakerHandout_AU222-1.pdf

 

The older issues should be posted to AUGI, but I can't seem to find them there yet.

Civil Reminders
http://blog.civil3dreminders.com/
http://www.CivilReminders.com/
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.