AutoCAD Architecture Customization

AutoCAD Architecture Customization

Reply
*Price, Greg M.
Message 1 of 8 (89 Views)

Variable Setting Question

89 Views, 7 Replies
03-31-2003 01:30 AM
does anyone know if there is a variable to set to maybe '0' or '1' that
makes the ChangeProperties dialog box pop up automatically upon start of
autocad or opening of a drawing ??....so you don't have to type 'ch' or
'_properties' or whatever to make it appear for the first time???


same question for the Autocad Design Center dialog box?



Thanks.

GMP
*bturner
Message 2 of 8 (89 Views)

Re: Variable Setting Question

03-31-2003 04:05 AM in reply to: *Price, Greg M.
Greg,
Normally this should hold from the session when you close it.

To get them to show up, have you tried pressing Ctrl + 1 for properties and
Ctrl + 2 for Design Center?

Hope this helps,
Beau

"Greg M. Price" wrote in message
news:EED7FFD29797C0833BB26AC5809FC479@in.WebX.maYIadrTaRb...
> does anyone know if there is a variable to set to maybe '0' or '1' that
> makes the ChangeProperties dialog box pop up automatically upon start of
> autocad or opening of a drawing ??....so you don't have to type 'ch' or
> '_properties' or whatever to make it appear for the first time???
>
>
> same question for the Autocad Design Center dialog box?
>
>
>
> Thanks.
>
> GMP
>
>
*Hutchinson, Mike
Message 3 of 8 (89 Views)

Re: Variable Setting Question

12-13-2003 11:23 PM in reply to: *Price, Greg M.
If it is up when you close down it comes up the next time it is opened.

"Greg M. Price" wrote:

> does anyone know if there is a variable to set to maybe '0' or '1' that
> makes the ChangeProperties dialog box pop up automatically upon start of
> autocad or opening of a drawing ??....so you don't have to type 'ch' or
> '_properties' or whatever to make it appear for the first time???
>
> same question for the Autocad Design Center dialog box?
>
> Thanks.
>
> GMP
*Price, Greg M.
Message 4 of 8 (89 Views)

Re:

12-13-2003 11:23 PM in reply to: *Price, Greg M.
nope - it doesn't.

i'm looking for the fix that will make it re-appear.....




"Mike Hutchinson" wrote in message
news:3E888343.CD466915@bbsae.com...
> If it is up when you close down it comes up the next time it is opened.
>
> "Greg M. Price" wrote:
>
> > does anyone know if there is a variable to set to maybe '0' or '1' that
> > makes the ChangeProperties dialog box pop up automatically upon start of
> > autocad or opening of a drawing ??....so you don't have to type 'ch' or
> > '_properties' or whatever to make it appear for the first time???
> >
> > same question for the Autocad Design Center dialog box?
> >
> > Thanks.
> >
> > GMP
>
*Claflin, David
Message 5 of 8 (89 Views)

Re:

12-13-2003 11:23 PM in reply to: *Price, Greg M.
You could add it to your acad.lsp file. I don't know of a variable.
David

"Greg M. Price" wrote in message
news:5C7C18C23DA91EAC937A4880D522BA12@in.WebX.maYIadrTaRb...
> nope - it doesn't.
>
> i'm looking for the fix that will make it re-appear.....
>
>
>
>
> "Mike Hutchinson" wrote in message
> news:3E888343.CD466915@bbsae.com...
> > If it is up when you close down it comes up the next time it is opened.
> >
> > "Greg M. Price" wrote:
> >
> > > does anyone know if there is a variable to set to maybe '0' or '1'
that
> > > makes the ChangeProperties dialog box pop up automatically upon start
of
> > > autocad or opening of a drawing ??....so you don't have to type 'ch'
or
> > > '_properties' or whatever to make it appear for the first time???
> > >
> > > same question for the Autocad Design Center dialog box?
> > >
> > > Thanks.
> > >
> > > GMP
> >
>
>
*Price, Greg M.
Message 6 of 8 (89 Views)

Re:

12-13-2003 11:23 PM in reply to: *Price, Greg M.
Thanks David,
Can you tell me how??





"David Claflin" wrote in message
news:50F29DAA09676CD0F798FFB8501D3C67@in.WebX.maYIadrTaRb...
> You could add it to your acad.lsp file. I don't know of a variable.
> David
>
> "Greg M. Price" wrote in message
> news:5C7C18C23DA91EAC937A4880D522BA12@in.WebX.maYIadrTaRb...
> > nope - it doesn't.
> >
> > i'm looking for the fix that will make it re-appear.....
> >
> >
> >
> >
> > "Mike Hutchinson" wrote in message
> > news:3E888343.CD466915@bbsae.com...
> > > If it is up when you close down it comes up the next time it is
opened.
> > >
> > > "Greg M. Price" wrote:
> > >
> > > > does anyone know if there is a variable to set to maybe '0' or '1'
> that
> > > > makes the ChangeProperties dialog box pop up automatically upon
start
> of
> > > > autocad or opening of a drawing ??....so you don't have to type 'ch'
> or
> > > > '_properties' or whatever to make it appear for the first time???
> > > >
> > > > same question for the Autocad Design Center dialog box?
> > > >
> > > > Thanks.
> > > >
> > > > GMP
> > >
> >
> >
>
>
*Claflin, David
Message 7 of 8 (89 Views)

Re:

12-13-2003 11:23 PM in reply to: *Price, Greg M.
Add the following two lines to your ACAD.LSP file with Notepad.

(command "_properties")
(command "_adcenter")

David

"Greg M. Price" wrote in message
news:A54323A4CC4222D6492B7EAA36BC9891@in.WebX.maYIadrTaRb...
> Thanks David,
> Can you tell me how??
>
>
>
>
>
> "David Claflin" wrote in message
> news:50F29DAA09676CD0F798FFB8501D3C67@in.WebX.maYIadrTaRb...
> > You could add it to your acad.lsp file. I don't know of a variable.
> > David
> >
> > "Greg M. Price" wrote in message
> > news:5C7C18C23DA91EAC937A4880D522BA12@in.WebX.maYIadrTaRb...
> > > nope - it doesn't.
> > >
> > > i'm looking for the fix that will make it re-appear.....
> > >
> > >
> > >
> > >
> > > "Mike Hutchinson" wrote in message
> > > news:3E888343.CD466915@bbsae.com...
> > > > If it is up when you close down it comes up the next time it is
> opened.
> > > >
> > > > "Greg M. Price" wrote:
> > > >
> > > > > does anyone know if there is a variable to set to maybe '0' or '1'
> > that
> > > > > makes the ChangeProperties dialog box pop up automatically upon
> start
> > of
> > > > > autocad or opening of a drawing ??....so you don't have to type
'ch'
> > or
> > > > > '_properties' or whatever to make it appear for the first time???
> > > > >
> > > > > same question for the Autocad Design Center dialog box?
> > > > >
> > > > > Thanks.
> > > > >
> > > > > GMP
> > > >
> > >
> > >
> >
> >
>
>
*Price, Greg M.
Message 8 of 8 (89 Views)

Re:

12-13-2003 11:23 PM in reply to: *Price, Greg M.
awesome!! Thank you very much!
GMP




"David Claflin" wrote in message
news:A3EBBB3CA2A2CCF4D75726EB395E5778@in.WebX.maYIadrTaRb...
> Add the following two lines to your ACAD.LSP file with Notepad.
>
> (command "_properties")
> (command "_adcenter")
>
> David
>
> "Greg M. Price" wrote in message
> news:A54323A4CC4222D6492B7EAA36BC9891@in.WebX.maYIadrTaRb...
> > Thanks David,
> > Can you tell me how??
> >
> >
> >
> >
> >
> > "David Claflin" wrote in message
> > news:50F29DAA09676CD0F798FFB8501D3C67@in.WebX.maYIadrTaRb...
> > > You could add it to your acad.lsp file. I don't know of a variable.
> > > David
> > >
> > > "Greg M. Price" wrote in message
> > > news:5C7C18C23DA91EAC937A4880D522BA12@in.WebX.maYIadrTaRb...
> > > > nope - it doesn't.
> > > >
> > > > i'm looking for the fix that will make it re-appear.....
> > > >
> > > >
> > > >
> > > >
> > > > "Mike Hutchinson" wrote in message
> > > > news:3E888343.CD466915@bbsae.com...
> > > > > If it is up when you close down it comes up the next time it is
> > opened.
> > > > >
> > > > > "Greg M. Price" wrote:
> > > > >
> > > > > > does anyone know if there is a variable to set to maybe '0' or
'1'
> > > that
> > > > > > makes the ChangeProperties dialog box pop up automatically upon
> > start
> > > of
> > > > > > autocad or opening of a drawing ??....so you don't have to type
> 'ch'
> > > or
> > > > > > '_properties' or whatever to make it appear for the first
time???
> > > > > >
> > > > > > same question for the Autocad Design Center dialog box?
> > > > > >
> > > > > > Thanks.
> > > > > >
> > > > > > GMP
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Announcements
Autodesk Alert | We are currently working on restoring Previous Version License request access in the Autodesk Subscription Center. If you are a subscription customer and would like to request a Previous Version License, please use this link as a temporary workaround. We apologize for the inconvenience and thank you for your patience.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.