Vista 64 and Autodesk Architecture

[Bubbaloo]

Is there anyone that can tell me how to install ACA08 on Vista 64 Business? Thanks!!!

[Anonymous]

you don't, not written for it, read all about it here by using the
search feature.

--
Dean
--

[Bubbaloo]

I did use the search, I couldn't find sh!t. Why the hell can't it be installed in the x86 folder like every other program???

[Anonymous]

Bub, Look at OP Dated: 3/18/07, Subject: "When will 64 bit OS be
supported?". It's a thread about two months long, with work-arounds listed
towards the end of the thread. There is at least 3 or 4 other similar
shorter threads.
--
Kevin Anderson
www.KAddAssociates.com

[Bubbaloo]

Thank you very much, Kevin! Was that so hard Dean?

[Anonymous]

dean is starting to make this place feel as hostile as AUGI forums lol

"Bubbaloo" wrote in message news:5656456@discussion.autodesk.com...
Thank you very much, Kevin! Was that so hard Dean?

[Anonymous]

Obviously you don't know how to use Search:

http://discussion.autodesk.com/search.jspa?numResults=25&inputEntered=true&source=viewforum%7C248&q=64bit&objID=f248&search.x=19&search.y=7

--
Dean Saadallah
Add-on products for LT
http://www.pendean.com/lt
--

[Anonymous]

I did not realize you were too handicapped to use the Search box:
http://discussion.autodesk.com/search.jspa?numResults=25&inputEntered=true&source=viewforum%7C248&q=64bit&objID=f248&search.x=19&search.y=7

Or do you need everyone to walk around doing it all for you like a child LOL

--
Dean Saadallah
Add-on products for LT
http://www.pendean.com/lt
--

[Anonymous]

Hostile to ask the OP to simply look? I'm not the one hiding an expletive
with !

--
Dean Saadallah
Add-on products for LT
http://www.pendean.com/lt
--

[Anonymous]

WOW, you really do not need to talk down to people like that. Makes them
feel bad and not happy. "realize you were too handicapped" "walk around
doing it all for you like a child" "Obviously you don't know how to use
Search"

Some people find it funny, but others may think it's rude. My suggestion is
to see a vet about getting a tranquilizer shot! 😉

"Dean Saadallah" wrote in message
news:5656718@discussion.autodesk.com...
I did not realize you were too handicapped to use the Search box:
http://discussion.autodesk.com/search.jspa?numResults=25&inputEntered=true&source=viewforum%7C248&q=64bit&objID=f248&search.x=19&search.y=7

Or do you need everyone to walk around doing it all for you like a child LOL

--
Dean Saadallah
Add-on products for LT
http://www.pendean.com/lt
--

[Anonymous]

Actually Autodesk does have a work around. Contact Autodesk Subscription
Support.


Dear Tom,


Attached you will find the files necessary to install your product in
a 64 bit environment.
Please follow the below installation instructions:

1.. Install the latest .NET Framework (64 bit) from Microsoft on the
destination workstations.
2.. Copy the contents of the installation DVD to a local drive or
network location.
3.. In the main install folder, rename the original MEP.msi and
setup.ini files to preserve them.
4.. Copy the provided replacement MEP.msi and Setup.ini files into
the main install folder.
5.. Run the installation/deployment procedure as normal.


Our development team is working on a true 64 bit application but
cannot provide any further details at this time.

Please let me know if you have any questions about this information
and I will be happy to address them.



Best Regards,

Kathryn Poulos
Autodesk Support Team






"Dean Saadallah" wrote in message
news:5656307@discussion.autodesk.com...
you don't, not written for it, read all about it here by using the
search feature.

--
Dean
--

[Anonymous]

I apologize for the rudeness, I should not have continued with the OPs bad
behavior by adding my own to the thread.

--
Dean Saadallah
Add-on products for LT
http://www.pendean.com/lt
--

[Bubbaloo]

Don't you have a building to blow up somewhere?

[tstright]

And isn't your school bell ringing?

[Bubbaloo]

Sorry, I couldn't resist. He was pretty much profiling me with his rediculously unhelpful comments. So I did a little profiling of my own... All in the context of humor.

[mikerodrigueziii]

Tom,

Would you be able to email those two files that they had you swap out with the OOTB ones? I'm wondering if this is the same issue that I'm currently having as well.

Thanks Mate,

Mike Rodriguez
CAD Manager
Borges Architectural Group, Inc.
www.borgesarch.com
mike@borgesarch.com

[Anonymous]

I actually have Acad MEP. The files for MEP are
different then the ones for ACA.

<mikerodrigueziii> wrote in message
href="news:5662532@discussion.autodesk.com">
size=2>news:5662532@discussion.autodesk.com
size=2>...

Tom,

Would you be able to
email those two files that they had you swap out with the OOTB ones? I'm
wondering if this is the same issue that I'm currently having as
well.

Thanks Mate,

Mike Rodriguez
CAD Manager
Borges
Architectural Group, Inc.

face=Arial size=2>www.borgesarch.com

href="mailto:mike@borgesarch.com">
size=2>mike@borgesarch.com

[Anonymous]

Dont worry Bub....If you do a search for most of Dean's comments you will
realize that he is like that to most everyone here... (smooch)
wrote in message news:5658846@discussion.autodesk.com...
Sorry, I couldn't resist. He was pretty much profiling me with his
rediculously unhelpful comments. So I did a little profiling of my own...
All in the context of humor.

[Swierk]

-----------------------------
WANT HELP ?
-----------------------------

email to swierko@op.pl and i will send you tutorial how to modify some files to end installation process. it's very easy and if you are installing programs by yourself you shouldn't have problem with that - about 3 mins