AutoCAD Architecture General Discussion

AutoCAD Architecture General Discussion

Reply
Member
howardcliu
Posts: 4
Registered: ‎10-24-2012
Message 1 of 6 (312 Views)

Graphic Card Help!

312 Views, 5 Replies
10-24-2012 07:59 AM

Hello All,

 

I am trying to find a good professional graphic card to run these programs and a good to better rate.

 

Programs I run majority of the time is Revit (architecture/MEP), I also use Inventor and AutoCAD. Basically its the whole Building Design Suite Ultimate. I do use Navisworks also. I may or maynot use Solidworks depending on job. I am not sure if I need to worry about CUDA cores or Stream Processing power.

 

My budget with the graphic card is less than $500. At the same time the lower the better. many of my experience have been with Quadro Cards like 600, 2000 and 4000 and I want to try out FirePro because of the cost.

 

My Idea is Quadro 4000 is too expensive ($760+) for me and Quadro 2000 seems kind of weak for a $400+ card. FirePro has V4900 for about $175. I think the V4900 may perform better than the 2000 but I am not sure with these programs that I run. Another Idea is if I run dual V4900 with crossfire, would I get performance better than the 2000 and close to a 4000 or better even? I am not sure, I have searched the internet and have not come accross anything on this. Other thoughts would be to try FirePro V5900 (a bit more expensive than the 2000 at $470) but I can in the future like 2-3 years buy another V5900 and maybe get performance close or better to a Quadro 5000 at a little over half the cost.

 

I need some help or experience or even similar logics.

 

Thanks to everyone.

 

 

System specs:

Intel Quad Core i5 3330 (3.0 Ghz)

16 GB ddr3 1600

Win7 64 bit Professsional

1920 x 1080 24" LCD

128SSD & 1TB 7200rpm

 

*Expert Elite*
pendean
Posts: 23,642
Registered: ‎11-06-2003
Message 2 of 6 (309 Views)

Re: Graphic Card Help!

10-24-2012 08:17 AM in reply to: howardcliu

What does the rest of the system look like? OS?

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Member
howardcliu
Posts: 4
Registered: ‎10-24-2012
Message 3 of 6 (305 Views)

Re: Graphic Card Help!

10-24-2012 08:27 AM in reply to: pendean

System specs:

Intel Quad Core i5 3330 (3.0 Ghz)

16 GB ddr3 1600

Win7 64 bit Professsional

1920 x 1080 24" LCD

128SSD & 1TB 7200rpm

*Expert Elite*
pendean
Posts: 23,642
Registered: ‎11-06-2003
Message 4 of 6 (299 Views)

Re: Graphic Card Help!

10-24-2012 09:03 AM in reply to: howardcliu

I personally have had good luck with FirePro vid cards, so I don't think you could go wrong there. As for which exact one you listed, I will leave that to others.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Distinguished Mentor
ntellery
Posts: 710
Registered: ‎04-15-2008
Message 5 of 6 (278 Views)

Re: Graphic Card Help!

10-25-2012 09:27 PM in reply to: howardcliu

Personally I would think you would get much better return by upgrading your cpu.

The i3 is an entry level chip only.  I would think getting a higher end card would be overkill and out of balance.  Not sure on the other programs but Acad relies heavily on the cpu rather than the graphics card.  Quad is good but I think most times only 1 chip is actually working.  Rendering and regenerating in ACad is multicore but much else is not.  

i7 if your mobo can take it would be a better investment and retain your existing card or use a cheap gaming card until you can upgrade.

www.ausaca.blogspot.com
Do you know all about the Roof Object? Learn it's secrets
http://www.youtube.com/playlist?list=PLD9BF5D8FF70CD3DF&feature=view_all
*Expert Elite*
pendean
Posts: 23,642
Registered: ‎11-06-2003
Message 6 of 6 (262 Views)

Re: Graphic Card Help!

10-26-2012 05:27 AM in reply to: ntellery

i5, not i3

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.