AutoCAD Architecture General Discussion

AutoCAD Architecture General Discussion

Reply
Active Contributor
aburgner
Posts: 49
Registered: ‎05-12-2008
Message 1 of 8 (5,631 Views)
Accepted Solution

Fatal Error unhandled e0434352h exception at 7c812afbh

5631 Views, 7 Replies
08-03-2012 06:25 AM

We have a 32-bit machine that continues to receive the above mentioned error message. This seems to happen unexpectedly and closes AutoCAD with no warning. It has been happening with more frequency lately. What causes this error and what steps may be taken to remedy it?

 

Thanks for any help anyone is able to provide.

We ended up removing all versions of .net Framework, then reinstalling those that were necessary.  Then we performed the repair for AutoCAD.  We do keep Windows updates current.  That did not seem to remedy the problem.  However, we've not had any additional problems since we updated the graphics card driver. 

Member
tgoranson
Posts: 3
Registered: ‎02-21-2012
Message 2 of 8 (5,585 Views)

Re: Fatal Error unhandled e0434352h exception at 7c812afbh

08-10-2012 11:43 AM in reply to: aburgner

Also getting this same error.  Tried removing all dotnet installs; ran dotnet cleanup; reinstalled dotnet v2 sp2 through v4; ran windows updates; ran autocad repair.  This is on AutoCad Architecture 2012.  Getting error after opening files.

Product Support
sergio.bertino
Posts: 63
Registered: ‎11-04-2011
Message 3 of 8 (5,554 Views)

Re: Fatal Error unhandled e0434352h exception at 7c812afbh

08-14-2012 06:54 AM in reply to: aburgner

Hi

Please try the solution posted on our blog:

http://upandready.typepad.com/up_and_ready/2011/08/autocad-family-exception-in-acmgddll-arx-command-...

Please, feel free to mark any response clicking on "Accept as Solution" button if it answers your question

Kind regards,
Sergio



Sergio Bertino
Member
tgoranson
Posts: 3
Registered: ‎02-21-2012
Message 4 of 8 (5,537 Views)

Re: Fatal Error unhandled e0434352h exception at 7c812afbh

08-15-2012 05:43 AM in reply to: aburgner

The 2 machine.config files already had Read and Read & Execute.  Your error message is a little different than what we are getting.  Thanks though for the post.

 

Product Support
sergio.bertino
Posts: 63
Registered: ‎11-04-2011
Message 5 of 8 (5,524 Views)

Re: Fatal Error unhandled e0434352h exception at 7c812afbh

08-16-2012 01:35 AM in reply to: aburgner

Hi,

Please try the following:

 

 

Please, feel free to mark any response clicking on "Accept as Solution" button if it answers your question

Kind regards,
Sergio



Sergio Bertino
Active Contributor
aburgner
Posts: 49
Registered: ‎05-12-2008
Message 6 of 8 (5,511 Views)

Re: Fatal Error unhandled e0434352h exception at 7c812afbh

08-16-2012 08:05 AM in reply to: sergio.bertino

We ended up removing all versions of .net Framework, then reinstalling those that were necessary.  Then we performed the repair for AutoCAD.  We do keep Windows updates current.  That did not seem to remedy the problem.  However, we've not had any additional problems since we updated the graphics card driver. 

New Member
RonObvious
Posts: 2
Registered: ‎03-06-2012
Message 7 of 8 (5,081 Views)

Re: Fatal Error unhandled e0434352h exception at 7c812afbh

11-18-2012 08:25 AM in reply to: sergio.bertino

Thanks Sergio, it worked for me. Probably the problem was with MS Visual C++ files..

New Member
frossi
Posts: 1
Registered: ‎04-01-2012
Message 8 of 8 (4,141 Views)

Re: Fatal Error unhandled e0434352h exception at 7c812afbh

06-05-2013 10:26 AM in reply to: sergio.bertino

Hello Mr. Bertino,
has the solution for this problem:

Fatal Error unhandled e0434352h exception at 7c812fd3h

I installed autocad 2012 on 32bit Win XP sp3 demo

Thanks
Francesco

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.