Commands won't work on ACA 2010 64 bit

[donied]

I've just installed ACA 2010 on my laptop on Windows XP64 bit

When I select a command such as the wall or door command. The command starts then exits out before I can draw anything.

Has anybody else had this problem?

I am also finding it's crahing a lot.

[jmcintyre]

No problems with XP64 and 2010 here (except for the menus).
What are your hardware specs?

[jmcintyre]

No problems with XP64 and 2010 here (except for the menus).
What are your hardware specs?

[donied]

Thanks for your reply

My spec is Win XP 64, dual core with 4gb ram

[Anonymous]

I'm not positive but this may be related to a
known issue in which add commands cease to function after the Properties Palette
has been anchored and closed.  To confirm if this is the case, make sure
the Properties Palette is visible on-screen and then try your commands.  If
they work, then it sounds like you've encountered this problem.  There
isn't a fix or work-around for this problem but you can avoid it by not
anchoring and closing the Properties Palette.

Tony Michniewicz

Autodesk - AEC Solutions

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

<dandeery@eircom.net>
wrote in message
href="news:6177651@discussion.autodesk.com">news:6177651@discussion.autodesk.com...

I've
just installed ACA 2010 on my laptop on Windows XP64 bit When I select a
command such as the wall or door command. The command starts then exits out
before I can draw anything. Has anybody else had this problem? I am also
finding it's crahing a lot.

[donied]

Thanks for your feedback.

I've tried that and I still have the problem



Thanks

[Anonymous]

I'm not sure what is causing this problem but
hopefully we can get to the bottom of it.  My next question would be if you
start the WALLADD command, what is echoed on the command line?  This might
give us some insight as to what is happening.

Tony Michniewicz

Autodesk - AEC Solutions

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

<dandeery@eircom.net>
wrote in message
href="news:6179572@discussion.autodesk.com">news:6179572@discussion.autodesk.com...

Thanks
for your feedback. I've tried that and I still have the problem
Thanks

[robert]

Does anyone have a fix for this problem?  I am experiencing the same problem. Reinstalling and repairing doesn't resolve the issue.