ADT: "Killing me softly "

[Anonymous]

Changing the name didn't help either...

http://www.google.com/trends?q=revit%2C+architectural+desktop%2C+archicad&ctab=0&geo=all&date=all&sort=1

[Anonymous]

talk is cheap


"Scott Davis - Autodesk" wrote in message
news:6036064@discussion.autodesk.com...
whatever...i'm not going to subscribe to your timing test. I know it can be
done easily. With a little practice you could too.

"Tom DeMita" wrote in message
news:6036023@discussion.autodesk.com...
tic toc

For the benefit of anyone else that thinks Revit cannot do muntins because
the process is too long:

[Anonymous]

I'd have to add that the detail component manager works a lot faster in ACA
as well.

Top four features I wish Revit had that are included in ADT/ACA:

1. The door number can match the room number automatically.
2. Creation of muntin and mullion patterns is easier in windows and doors
3. The section/elevation object allows for a gradation of lineweights as you
get farther from the cut line
4. Wall type assemblies allow for elements to have a bottom and top height,
making the staking of compoenets in a wall relativaly easy. In Revit this
process is a little convoluted as it requires the making of sweeps, etc.