AutoCAD 2013/2014/2015

Reply
Member
ifjfecso
Posts: 5
Registered: ‎01-15-2013
Message 1 of 4 (1,186 Views)

Wireframe vs. 2D Wireframe

1186 Views, 3 Replies
01-15-2013 06:32 AM

Hi!

 

I would like to know what is the difference between Wireframe and 2D Wireframe.

I can choose both, but I have very slow performance under 2D Wireframe.

I have a 3D model and when I change my view to 2D Wireframe and try to rotate(shift+middle click) than I need to wait

5 second.

If I hold down the key and mouse button, than I can rote it. Wen I go to simply Wireframe, I don't have lag.

 

I use Autodesk Autocad 2013 SP1 with certified Quadro 2000 driver on Win7 64bit.

 

I see something on other computer in Autodesk 2012.

If I chose 2D wireframe, then Autocad switch it automatically to Wireframe.

Where can I switch on/off this settings in 2013?

 

Any aswere will be helpful...

 

 

 

 

Mentor
thebearjed
Posts: 232
Registered: ‎10-05-2009
Message 2 of 4 (1,146 Views)

Re: Wireframe vs. 2D Wireframe

01-22-2013 01:09 PM in reply to: ifjfecso

i would also like to know the answer to this one.

New Member
eddyp
Posts: 1
Registered: ‎05-12-2011
Message 3 of 4 (1,088 Views)

Re: Wireframe vs. 2D Wireframe

02-05-2013 10:39 AM in reply to: ifjfecso

I have the opposite problem where wireframe makes it sluggish???

*Expert Elite*
Alfred.NESWADBA
Posts: 9,084
Registered: ‎06-29-2007
Message 4 of 4 (1,075 Views)

Re: Wireframe vs. 2D Wireframe

02-05-2013 02:44 PM in reply to: ifjfecso

Hi,

 

>> I would like to know what is the difference between Wireframe and 2D Wireframe.

IMHO "2D-Wireframe" uses software display driver while "Wireframe" tries to use the hardware acceleration (vector displaylist is hold on the gc as long as possible).

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.