AutoCAD 2013/2014/2015

Reply
Member
construccion777
Posts: 3
Registered: ‎07-23-2012
Message 1 of 6 (153 Views)

Link two points

153 Views, 5 Replies
07-23-2012 07:59 PM
There are to points and between them a lot of obtructions therefore there is not possible to link using only ome line. Is there a command to link ?
Mentor
grimline
Posts: 208
Registered: ‎11-16-2003
Message 2 of 6 (148 Views)

Re: Link two points

07-23-2012 09:26 PM in reply to: construccion777

PLINE command

Autodesk AutoCAD Map 3D 2015
Windows 7 Professional
Service Pack 1
Intel(R) Core(TM) i5-4430 CPU @ 3.00 GHz
8.00 GB RAM
Member
construccion777
Posts: 3
Registered: ‎07-23-2012
Message 3 of 6 (133 Views)

Re: Link two points

07-24-2012 07:42 AM in reply to: construccion777

Yes but you have to define the path . I am looking for an automatic method . This is very usefull to design circuits.

*Expert Elite*
dbroad
Posts: 1,647
Registered: ‎08-16-2007
Message 4 of 6 (121 Views)

Re: Link two points

07-24-2012 08:30 AM in reply to: construccion777

You'd have to investigate available verticals or third party apps..  Automatic routing is not available in Autocad base.

*Expert Elite*
JDMather
Posts: 28,228
Registered: ‎04-20-2006
Message 5 of 6 (112 Views)

Re: Link two points

07-24-2012 11:26 AM in reply to: construccion777

Are you familiar with parametric geometry constraints?

Post an example file here.
Might be as simple as coincident constraint.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
construccion777
Posts: 3
Registered: ‎07-23-2012
Message 6 of 6 (104 Views)

Re: Link two points

07-24-2012 12:30 PM in reply to: construccion777

Thank you I will check the example

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.