AutoCAD 2013/2014/2015

AutoCAD 2013/2014/2015

Reply
Member
alex
Posts: 3
Registered: ‎01-04-2014
Message 1 of 6 (536 Views)

In Autocad 2014, 3D embossed text on a solid cylinder circumferance

536 Views, 5 Replies
01-20-2014 07:27 AM

How in Autocad 2014 do you place 3D text embossed on to a cylinder circumferance?

*Expert Elite*
Patchy
Posts: 6,262
Registered: ‎09-16-2009
Message 2 of 6 (521 Views)

Re: In Autocad 2014, 3D embossed text on a solid cylinder circumferance

01-20-2014 08:36 AM in reply to: alex

Wrap around a curve surface is not available with autocad (Inventor can do it)

Autocad can do Extrude, Imprint, Project geometry......

*Expert Elite*
JDMather
Posts: 26,848
Registered: ‎04-20-2006
Message 3 of 6 (510 Views)

Re: In Autocad 2014, 3D embossed text on a solid cylinder circumferance

01-20-2014 08:51 AM in reply to: alex

Not quite the same as using Emboss - Wrap to Face in Autodesk Inventor, but the attached file might give you some ideas.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
alex
Posts: 3
Registered: ‎01-04-2014
Message 4 of 6 (502 Views)

Re: In Autocad 2014, 3D embossed text on a solid cylinder circumferance

01-20-2014 09:00 AM in reply to: alex

thank you.

Member
alex
Posts: 3
Registered: ‎01-04-2014
Message 5 of 6 (501 Views)

Re: In Autocad 2014, 3D embossed text on a solid cylinder circumferance

01-20-2014 09:00 AM in reply to: JDMather
thank you , very helpful indeed.
*Expert Elite*
JDMather
Posts: 26,848
Registered: ‎04-20-2006
Message 6 of 6 (473 Views)

Re: In Autocad 2014, 3D embossed text on a solid cylinder circumferance

01-21-2014 08:32 AM in reply to: alex

I guess you figured out solidedit imprint and solidedit color faces.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.