AutoCAD 2013/2014/2015

AutoCAD 2013/2014/2015

Reply
Active Member
6 Posts
0 Kudos
Registered: ‎05-08-2007
Post 1 of 3
Accepted Solution

HP T2300 Plotter

681 Views, 2 Replies
09-19-2012 08:19 AM

Has anyone else had this problem.  I upgraded to AutoCAD 2013 from 2012 and now when I try and print to our HP Designjet T2300 plotter it prints in the lower corner of the page on a 36"x24" landscape page full size just only 24" wide and down 12".  I am just starting to try and figure out what the problem might be.  I worked around it by printing in 2012 which works just fine.

 

Any help would be great.

 

Thanks

Steve

Thanks DJ I'll give that a try.

*Expert Elite*
1,773 Posts
85 Kudos
Registered: ‎03-01-2006
Post 2 of 3

Re: HP T2300 Plotter

09-19-2012 01:02 PM in reply to: ssmith

ssmith wrote:

Has anyone else had this problem.  I upgraded to AutoCAD 2013 from 2012 and now when I try and print to our HP Designjet T2300 plotter it prints in the lower corner of the page on a 36"x24" landscape page full size just only 24" wide and down 12".  I am just starting to try and figure out what the problem might be.  I worked around it by printing in 2012 which works just fine.

 

Any help would be great.

 

Thanks

Steve


I had a similar pproblem (not exactly but similar) and the solution was to go to HP website and locate, download and install the HP universal printer/plotter driver.

 

Worked for me.  YMMV

 

Make a restore point before installing the new driver.  If it doesn't work, restore to the restore point you made before you installed the driver.

 

Regards,

DJ

 

Active Member
6 Posts
0 Kudos
Registered: ‎05-08-2007
Post 3 of 3

Re: HP T2300 Plotter

09-19-2012 01:08 PM in reply to: drjohn

Thanks DJ I'll give that a try.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post