AutoCAD 2013/2014/2015

AutoCAD 2013/2014/2015

Reply
Mentor
JamaL9722060
Posts: 1,342
Registered: ‎04-09-2010
Message 1 of 3 (444 Views)
Accepted Solution

“Hatch” disappears as it is exploded,

444 Views, 2 Replies
02-10-2013 12:09 PM

“Hatch” disappears as it is exploded,

 

I’m wondering why the hatch (attached) of AR-HBONE pattern name with a scale of 0.02 disappears as it is exploded.

 

 

 

What might be the issue?

 

 

Thank you

 

Best

 

Jamal

----------------------------------------------------------
Jamal NUMAN, GIS and Civil Engineer, MSc
e-mail: JamaL9722060@yahoo.com
P.O.Box: 731, Ramallah, West Bank, Palestine.
----------------------------------------------------------
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

Hi,

 

>> What might be the issue?

  • It's to dense to be displayed, therefor you see it as filled and hatches of type SOLID are also "eliminated" when exploded. (The difference to 2012 is that 2012 tells you "it's not explodable", but 2013 erases it completly, ...not fine).
  • It would create to many entities, at least more than AutoCAD might save in a drawing (and stay stable and performant)

 

The possible workarounds:

  • reduce the scale to e.g. 0.2, then it's explodeable and gives you the lines back.
  • zoom in to the hatch until you see the pattern (and not any more a sollid fill) and then try to explode it (but make sure first to have enough memory available).

 

- alfred -

*Expert Elite*
Alfred.NESWADBA
Posts: 9,217
Registered: ‎06-29-2007
Message 2 of 3 (438 Views)

Re: “Hatch” disappears as it is exploded,

02-10-2013 12:43 PM in reply to: JamaL9722060

Hi,

 

>> What might be the issue?

  • It's to dense to be displayed, therefor you see it as filled and hatches of type SOLID are also "eliminated" when exploded. (The difference to 2012 is that 2012 tells you "it's not explodable", but 2013 erases it completly, ...not fine).
  • It would create to many entities, at least more than AutoCAD might save in a drawing (and stay stable and performant)

 

The possible workarounds:

  • reduce the scale to e.g. 0.2, then it's explodeable and gives you the lines back.
  • zoom in to the hatch until you see the pattern (and not any more a sollid fill) and then try to explode it (but make sure first to have enough memory available).

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Mentor
JamaL9722060
Posts: 1,342
Registered: ‎04-09-2010
Message 3 of 3 (400 Views)

Re: “Hatch” disappears as it is exploded,

02-14-2013 02:26 PM in reply to: Alfred.NESWADBA

Thank you Alfred for the answer. This is very useful.

 

I’ll see if the valuable workarounds fit well with what I’m looking for

 

Best

 

Jamal

----------------------------------------------------------
Jamal NUMAN, GIS and Civil Engineer, MSc
e-mail: JamaL9722060@yahoo.com
P.O.Box: 731, Ramallah, West Bank, Palestine.
----------------------------------------------------------
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.