We are having an issue with Dimensioning and the Primary Units not maintaining the correct value. We use metric so the multiplier of 25.4 or .039370079 for Dim Scale Linear would be used in our Dimension Styles depending on if we are drawing in model space or annotating in paper space. We have created specific Dim Styles for Model and Paper space. Every so often some of us will us the Dim Style for paper space and a metric unit would be shown. When we go into the properties of that dimension and change the Dim Scale Linear to 1 it shows as a different dimension then it actually is. After looking at the correct dimenion, we noticed the Dim Scale Linear shows .9449 but gives the correct dimension.
Note: We are drawing in Metric a multiplier of 25.4, our dimensions are done in english. A scale factor of .039370079 is used to accomplish this.
There is a simple fix with Match Properties but it still doesn't answer why our dimension show up wrong with a different multiplier for Dim Scale Linear.
Anyone have any ideas?
is there a reason you are shying away from using one single Annotative Dimstyle for all your dimensioning needs in a file? You must also set up an Associative Text Style but it's way simpler than juggling two dimstyles like you are doing.
Whatever your answer, not posting a DWG that exhibits the problem is just going to prolong finding you a workable final solution: pony up a file.