AutoCAD 2013/2014/2015

AutoCAD 2013/2014/2015

Reply
Active Contributor
rfrisch
Posts: 28
Registered: ‎07-30-2008
Message 1 of 5 (3,538 Views)
Accepted Solution

Create a 3d cylinder with a 45 degree angle cut on the other end

3538 Views, 4 Replies
06-18-2012 03:10 PM

Hi Everyone;

 

    I am have a problem. How do you create a cylinder with a flat end on one side and on the other side have it at a 45 degree angle. I would appricate any and all suggestions. Thanks and have a nice week

The SLICE command and theSOLIDEDIT>TaperFaces command should also be in AutoCAD2009.  (as long as it's not AutoCADLT)

*Pro
nestly
Posts: 1,283
Registered: ‎09-03-2010
Message 2 of 5 (3,535 Views)

Re: Create a 3d cylinder with a 45 degree angle cut on the other end

06-18-2012 03:38 PM in reply to: rfrisch

SLICE, or Taper Faces are two options.

 

Taper Faces.gif

Active Contributor
rfrisch
Posts: 28
Registered: ‎07-30-2008
Message 3 of 5 (3,511 Views)

Re: Create a 3d cylinder with a 45 degree angle cut on the other end

06-19-2012 11:40 AM in reply to: nestly
Hi nestly (*Pro); Thank you for the information. One of our employees is learning on 2012 Autocad on his machine he brought in. I showed him the video which was real helpful. Unfortunately we don't have 2013 Autocad. Hopefully we will be able to upgrade to 2013 soon from (dare I say) Autocad 2009. I really like the slice command. Once again Thanks for the information. Ray Ray Frisch Dieterich Architectural Group Inc. Phone 480 948 8911 Fax 480 948 3501 E-mail rfrisch@dietericharch.com
*Pro
nestly
Posts: 1,283
Registered: ‎09-03-2010
Message 4 of 5 (3,506 Views)

Re: Create a 3d cylinder with a 45 degree angle cut on the other end

06-19-2012 12:29 PM in reply to: rfrisch

The SLICE command and theSOLIDEDIT>TaperFaces command should also be in AutoCAD2009.  (as long as it's not AutoCADLT)

Active Contributor
rfrisch
Posts: 28
Registered: ‎07-30-2008
Message 5 of 5 (3,499 Views)

Re: Create a 3d cylinder with a 45 degree angle cut on the other end

06-19-2012 01:32 PM in reply to: nestly
nestly (*Pro); Guess what, we did find it in both 2009 and 2012. I guess that's what happens when we don't do very much (none) 3D here. Thanks for getting back with me. I really appreciate it. Have a great day. ray Ray Frisch Dieterich Architectural Group Inc. Phone 480 948 8911 Fax 480 948 3501 E-mail rfrisch@dietericharch.com
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.