AutoCAD 2013/2014/2015

Reply
Distinguished Contributor
blowout
Posts: 133
Registered: ‎11-30-2006
Message 1 of 5 (317 Views)
Accepted Solution

Blocks

317 Views, 4 Replies
11-05-2012 09:52 AM

I inserted a block into a very busy drawing. I can't find it now. Is there a way to locate it? I want to delete and insert a newer  version, but I can't until I delete this one.

Try FILTER command.

Or QSELECT command.

Another possibility.  Do you know the name of the block?  If so, you can go into the block editor (BEDIT command) and either modify this block or save as a newer updated block.  When you execute BEDIT you will see a list of all the drawing's blocks....pick from this list (can just double-click on the block's name to bring you into the editor itself).  Just a thought.

**Master
dmfrazier
Posts: 2,752
Registered: ‎05-13-2003
Message 2 of 5 (309 Views)

Re: Blocks

11-05-2012 10:06 AM in reply to: blowout

Try FILTER command.

*Expert Elite*
3wood
Posts: 1,125
Registered: ‎03-25-2009
Message 3 of 5 (297 Views)

Re: Blocks

11-05-2012 02:48 PM in reply to: blowout

Or QSELECT command.

Mentor
lovecraft
Posts: 157
Registered: ‎10-07-2008
Message 4 of 5 (276 Views)

Re: Blocks

11-06-2012 04:41 AM in reply to: blowout

Another possibility.  Do you know the name of the block?  If so, you can go into the block editor (BEDIT command) and either modify this block or save as a newer updated block.  When you execute BEDIT you will see a list of all the drawing's blocks....pick from this list (can just double-click on the block's name to bring you into the editor itself).  Just a thought.

*Pro
murray-clack
Posts: 1,809
Registered: ‎12-08-2003
Message 5 of 5 (250 Views)

Re: Blocks

11-06-2012 07:18 AM in reply to: lovecraft

Here's another trick...

 

Enter the [undocumented] command PSELECT, and when prompted to "Select Objects", enter L for "Last" and press Enter, and the last object created will appear highlighted with its grips active

 

(You can also enter P for "Previous" selection which will highlight the previous selection of objects)

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post