AutoCAD 2010/2011/2012

Reply
New Member
bfaltesek
Posts: 1
Registered: ‎01-17-2011
Message 1 of 5 (486 Views)

wipeout help

486 Views, 4 Replies
01-17-2011 11:45 AM

When I print to our KIP5000 Plotter from either Autocad 2009 or 2011,  It is shading the area around wipeouts.  If I print to any other pinter in our office I dont have this problem.  When anyone else in my office opens up the same drawing and prints to the same plotter, they dont have this problem.  I just got a new computer which uses Windows 7.  Everyone else in the office is still using Windows XP.  I have attached a scan of what the plotter is doing.  I have the same drivers as everyone else in the office also.

New Member
hydropwr
Posts: 1
Registered: ‎11-03-2011
Message 2 of 5 (289 Views)

Re: wipeout help

11-03-2011 02:35 PM in reply to: bfaltesek

It would be a printer driver issue. I have had this problem for some time and a PLC6 driver seems to help. Give it a try and let me know! Good Luck!

*Expert Elite*
troma
Posts: 2,524
Registered: ‎05-21-2008
Message 3 of 5 (261 Views)

Re: wipeout help

11-07-2011 02:08 PM in reply to: hydropwr

Is this a vector versus raster issue?  Not sure exactly what they are, but different ways for sending data to a plotter.


Credit where credit is due! Give kudos or accept as solution whenever you can.

Active Contributor
ergig
Posts: 41
Registered: ‎10-01-2008
Message 4 of 5 (246 Views)

Re: wipeout help

11-08-2011 11:09 AM in reply to: bfaltesek

Create a specific layer for your wipeout with color 255.

 

Note: don't force the color by just changing it to 255 cause it won't work, it needs to be BYLAYER. 

Valued Contributor
bthomas9120
Posts: 54
Registered: ‎10-01-2010
Message 5 of 5 (234 Views)

Re: wipeout help

11-09-2011 05:25 AM in reply to: ergig

Usually when a wipeout doesn't work it blanks the whole text object. I'm curious if those are background mask with a fill color and not wipeouts. One thing you might check.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!