AutoCAD 2010/2011/2012

AutoCAD 2010/2011/2012

Reply
Contributor
carlos.arredondo
Posts: 27
Registered: ‎01-22-2010
Message 1 of 7 (292 Views)

TEXT POSITION FOR ED COMMAND

292 Views, 6 Replies
05-25-2012 07:32 AM

Hi everybody,
I'm using the ED command in AutoCAD 2012. I have my texts verticals, but I want to edit them in horizontal position, however when I active the command and I select the text, the edit option appears in vertical position. What can I do to control this option? Is there some variable to control this option?
Thank you for your help.

*Expert Elite*
Patchy
Posts: 6,240
Registered: ‎09-16-2009
Message 2 of 7 (289 Views)

Re: TEXT POSITION FOR ED COMMAND

05-25-2012 07:34 AM in reply to: carlos.arredondo

You're using a font with @ infront of the font name right?

If you do , DON'T.

Contributor
carlos.arredondo
Posts: 27
Registered: ‎01-22-2010
Message 3 of 7 (284 Views)

Re: TEXT POSITION FOR ED COMMAND

05-25-2012 08:00 AM in reply to: Patchy

Thanks!

This happen with any text font.

*Expert Elite*
Patchy
Posts: 6,240
Registered: ‎09-16-2009
Message 4 of 7 (282 Views)

Re: TEXT POSITION FOR ED COMMAND

05-25-2012 08:04 AM in reply to: carlos.arredondo

Any font :smileysurprised:

Attach .dwg here and let's see.

Contributor
carlos.arredondo
Posts: 27
Registered: ‎01-22-2010
Message 5 of 7 (274 Views)

Re: TEXT POSITION FOR ED COMMAND

05-25-2012 08:37 AM in reply to: carlos.arredondo

Hi, the font is ROMANS. However, It only happen in a specific machine, because I try in any other PC but doesn't happen that.

Mentor
Johneng
Posts: 231
Registered: ‎02-04-2009
Message 6 of 7 (268 Views)

Re: TEXT POSITION FOR ED COMMAND

05-25-2012 09:15 AM in reply to: carlos.arredondo

What is your MTEXTFIXED system variable set at? Sounds like it might be set on 0 or 1. Try changing it to 2 and see if the text editor works the way you want it to.

 

The MTEXTFIXED system variable sets the display size and orientation of multiline text in a specified text editor.

Type:Integer
Saved in:Registry
Initial value:2

If MTEXTED is set to “Internal,” multiline text is displayed in the In-Place Text Editor, and the setting of MTEXTFIXED has the following results:

0 or 1

Displays the In-Place Text Editor and the text within it at the size, position, and rotation of the multiline text object in the drawing.

2

 

 

Displays the In-Place Text Editor and the text within it at the size, position, and rotation of the multiline text object in the drawing.

 Text that would otherwise be difficult to read (if it is very small, very large, or is rotated) is displayed at a legible size and is oriented horizontally so that you can easily read and edit it.

Contributor
carlos.arredondo
Posts: 27
Registered: ‎01-22-2010
Message 7 of 7 (256 Views)

Re: TEXT POSITION FOR ED COMMAND

05-25-2012 09:40 AM in reply to: Johneng

I had solved the doubt, however thank you so much for your valuable answer.

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.