AutoCAD 2010/2011/2012

AutoCAD 2010/2011/2012

Reply
Member
Ted_G
Posts: 3
Registered: ‎09-30-2011
Message 1 of 5 (1,509 Views)
Accepted Solution

Some text and leaders not showing up from ACAD 2005 to 2011

1509 Views, 4 Replies
09-30-2011 07:42 AM

I am working in vanilla AutoCAD 2011, when opening some drawings that were created in AutoCAD 2005 (2004 file format), some of the text and leaders do not show up. Not all the drawings in the set and not all the text or leaders are dissappering.

 

I'm not sure if the drawings were created with AutoCAD 2005 or 2006 ADT, but seem to be vanilla AutoCAD.

 

If you open the drawings up in 2005, the text and leaders are still there.

 

Tried recovering in both 2005 and 2011, tried saving down to 2000, nothing seems to help.

 

Any thoughts or suggestions?

See attached: you missing items did not have the 1/8" annotative scale attached to them in modelspace.

*Expert Elite*
pendean
Posts: 23,722
Registered: ‎11-06-2003
Message 2 of 5 (1,507 Views)

Re: Some text and leaders not showing up from ACAD 2005 to 2011

09-30-2011 07:47 AM in reply to: Ted_G

share a problem file here.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Member
Ted_G
Posts: 3
Registered: ‎09-30-2011
Message 3 of 5 (1,498 Views)

Re: Some text and leaders not showing up from ACAD 2005 to 2011

09-30-2011 08:14 AM in reply to: pendean

Here is a test file to look at.

(disclaimer: I didn't create this file, just working with it)

 

Thanks

*Expert Elite*
pendean
Posts: 23,722
Registered: ‎11-06-2003
Message 4 of 5 (1,493 Views)

Re: Some text and leaders not showing up from ACAD 2005 to 2011

09-30-2011 08:42 AM in reply to: Ted_G

See attached: you missing items did not have the 1/8" annotative scale attached to them in modelspace.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Member
Ted_G
Posts: 3
Registered: ‎09-30-2011
Message 5 of 5 (1,484 Views)

Re: Some text and leaders not showing up from ACAD 2005 to 2011

09-30-2011 09:14 AM in reply to: pendean

Thank you!!

I could have sworn I checked all of that.

I don't use annotative text, so there are some things I don't know to even look for.

 

(cheers)

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.