AutoCAD 2010/2011/2012

AutoCAD 2010/2011/2012

Reply
Member
Ted_G
Posts: 3
Registered: ‎09-30-2011
Message 1 of 5 (1,485 Views)
Accepted Solution

Some text and leaders not showing up from ACAD 2005 to 2011

1485 Views, 4 Replies
09-30-2011 07:42 AM

I am working in vanilla AutoCAD 2011, when opening some drawings that were created in AutoCAD 2005 (2004 file format), some of the text and leaders do not show up. Not all the drawings in the set and not all the text or leaders are dissappering.

 

I'm not sure if the drawings were created with AutoCAD 2005 or 2006 ADT, but seem to be vanilla AutoCAD.

 

If you open the drawings up in 2005, the text and leaders are still there.

 

Tried recovering in both 2005 and 2011, tried saving down to 2000, nothing seems to help.

 

Any thoughts or suggestions?

See attached: you missing items did not have the 1/8" annotative scale attached to them in modelspace.

*Expert Elite*
pendean
Posts: 23,349
Registered: ‎11-06-2003
Message 2 of 5 (1,483 Views)

Re: Some text and leaders not showing up from ACAD 2005 to 2011

09-30-2011 07:47 AM in reply to: Ted_G

share a problem file here.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Member
Ted_G
Posts: 3
Registered: ‎09-30-2011
Message 3 of 5 (1,474 Views)

Re: Some text and leaders not showing up from ACAD 2005 to 2011

09-30-2011 08:14 AM in reply to: pendean

Here is a test file to look at.

(disclaimer: I didn't create this file, just working with it)

 

Thanks

*Expert Elite*
pendean
Posts: 23,349
Registered: ‎11-06-2003
Message 4 of 5 (1,469 Views)

Re: Some text and leaders not showing up from ACAD 2005 to 2011

09-30-2011 08:42 AM in reply to: Ted_G

See attached: you missing items did not have the 1/8" annotative scale attached to them in modelspace.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Member
Ted_G
Posts: 3
Registered: ‎09-30-2011
Message 5 of 5 (1,460 Views)

Re: Some text and leaders not showing up from ACAD 2005 to 2011

09-30-2011 09:14 AM in reply to: pendean

Thank you!!

I could have sworn I checked all of that.

I don't use annotative text, so there are some things I don't know to even look for.

 

(cheers)

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!