AutoCAD 2010/2011/2012

AutoCAD 2010/2011/2012

Reply
Active Member
FlippiedB
Posts: 8
Registered: ‎01-26-2011
Message 1 of 7 (730 Views)
Accepted Solution

Single Attributes in multiple text

730 Views, 6 Replies
02-22-2012 04:55 AM

I wonder if this is possible.

 

In my title block I have a attribute with the name project_Number. Now what I want to do is the following. When I edit my block with the project number. The project number should automatically be added to a text box without me typing in the project number twice.

 

E.g.. This Drawing is part of the consulting services provided for Project[Project_Number] and may not be used or applied for any other purpose without prior consultation.

 

in other word the project number should be reference in the text box from the attribute. Is this possible???

Hi All

 

autodesk was able to give me a solution that works perfect 

 

You can insert Attribute as a field in Mtext object.

1. Create an attribute
2. Start the Mtext command > while Mtext is still active, click on Field in Ribbon Insert panel
3. Field dialog > under Field names: select "Object" > at Object type: click the Select Object button and select the attribute > under Property select "Prompt" > OK to close Field dialog.
Result: Attribute is inserted as a field in Mtext.

*Expert Elite*
JGerth
Posts: 2,225
Registered: ‎12-05-2005
Message 2 of 7 (713 Views)

Re: Single Attributes in multiple text

02-22-2012 07:52 AM in reply to: FlippiedB

it would be much simpler in the long run for both locations to use a field pointing to either a value in DWGPROPS (less ideal) or a ProjectNumber in Sheet Set Manager (ideal). 

Active Member
FlippiedB
Posts: 8
Registered: ‎01-26-2011
Message 3 of 7 (710 Views)

Re: Single Attributes in multiple text

02-22-2012 07:59 AM in reply to: JGerth

thanx

 

the sheetset manager works perfect. but our company don't use the sheet set manager. i'll try to convience them by doing so but in the meantime im trying to explore other ideas.

*Expert Elite*
dgorsman
Posts: 5,698
Registered: ‎10-12-2006
Message 4 of 7 (697 Views)

Re: Single Attributes in multiple text

02-22-2012 09:59 AM in reply to: FlippiedB

Placeholder field?

----------------------------------
If you are going to fly by the seat of your pants, expect friction burns.
Adopt. Adapt. Overcome. Or be overcome.
A good question will be halfway to a good answer.


Active Member
FlippiedB
Posts: 8
Registered: ‎01-26-2011
Message 5 of 7 (677 Views)

Re: Single Attributes in multiple text

03-09-2012 12:26 AM in reply to: FlippiedB

Hi All

 

autodesk was able to give me a solution that works perfect 

 

You can insert Attribute as a field in Mtext object.

1. Create an attribute
2. Start the Mtext command > while Mtext is still active, click on Field in Ribbon Insert panel
3. Field dialog > under Field names: select "Object" > at Object type: click the Select Object button and select the attribute > under Property select "Prompt" > OK to close Field dialog.
Result: Attribute is inserted as a field in Mtext.

New Member
zerogtravel
Posts: 1
Registered: ‎01-02-2013
Message 6 of 7 (603 Views)

Re: Single Attributes in multiple text

01-02-2013 06:10 AM in reply to: FlippiedB

I am doing this in AutoCAD Mechanical 2012... This how I am doing it:

 

1. Creating an attribute on a layer that does not plot.

2. In my MTEXT, right clicking and selecting "Insert Field" from drop down menu.

3. Under "Field names:" select "Object"

4. For "Object Type" I am picking the attribute.

5. Under "Property:" I am selecting "Value"

 

The default value should show up in the "Preview" column.

 

6. Then just hit "OK"

New Member
joshuawenzel
Posts: 2
Registered: ‎01-02-2013
Message 7 of 7 (593 Views)

Re: Single Attributes in multiple text

01-02-2013 06:51 AM in reply to: zerogtravel

previous doesn't work in a block....

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.