AutoCAD 2010/2011/2012

Reply
Distinguished Contributor
martin888888
Posts: 234
Registered: ‎01-27-2011
Message 1 of 2 (712 Views)

Rotating Views In Model Space

712 Views, 1 Replies
10-08-2012 03:41 PM

I have a sheet drawing with all my background xref'd into it.  How do I rotate the view in model space so it will show appropriatley in the sheet view in paper space?

*Expert Elite*
dbroad
Posts: 1,577
Registered: ‎08-16-2007
Message 2 of 2 (685 Views)

Re: Rotating Views In Model Space

10-09-2012 05:31 AM in reply to: martin888888

If you are really sure that you want to rotate your model space objects, use the relative form of rotate.  After selecting objects and base point, select Relative, choose the direction you want to be 0 by picking 2 points with osnap on.  Enter 0 as the target angle.

 

Otherwise, if you just want to change your model coordinates, use the UCS z option and pick 2 points on a line to be 0 angle. Then use the PLAN command.

 

Otherwise, if you just want to change your viewport, use the ucs/plan sequence in a viewport.

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.