AutoCAD 2010/2011/2012

Reply
Contributor
juliewaddell1075
Posts: 21
Registered: ‎11-17-2008
Message 1 of 3 (161 Views)

Mulitleader Arrow

161 Views, 2 Replies
10-04-2012 08:39 AM

The multileader arrow is not showing even if the number is increased (ie from "4" to "10") in the multileader dialog box or under the properties when modified.

Sincerely,

JamJaws31
*Expert Elite*
dbroad
Posts: 1,646
Registered: ‎08-16-2007
Message 2 of 3 (156 Views)

Re: Mulitleader Arrow

10-04-2012 09:41 AM in reply to: juliewaddell1075

Is your multileader annotative?  If so, 4 to 10" is way too big.  The arrows would be so large that they would not be drawn in a typical leader length.  Arrows should be set between 3/32" and 3/16" if annotatively scaled.  Check your annotation scale as well.

Contributor
juliewaddell1075
Posts: 21
Registered: ‎11-17-2008
Message 3 of 3 (154 Views)

Re: Mulitleader Arrow

10-04-2012 09:45 AM in reply to: dbroad
This worked. Thank you for your assistance.
Sincerely,

JamJaws31
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.