AutoCAD 2010/2011/2012

AutoCAD 2010/2011/2012

New Member
Posts: 1
Registered: ‎12-12-2012
Message 1 of 4 (177 Views)

Layer not showing in Viewport

177 Views, 3 Replies
12-12-2012 01:28 PM

I have a master drawing with multiple xrefed building sketches. Looking at the model space on the "master" I can see all the room identities. However, if I go to the sheets that I have created and look at the viewports. The room identies are not there. The layer is called A-Room-Iden and it is on and not frozen...


Any ideas?

*Expert Elite*
Posts: 2,754
Registered: ‎12-17-2004
Message 2 of 4 (175 Views)

Re: Layer not showing in Viewport

12-12-2012 01:39 PM in reply to: butters4life24


are the room identities, annotative blocks?

If they are, select them, and in properties add the viewports scales.



Valued Mentor
Posts: 513
Registered: ‎10-29-2009
Message 3 of 4 (161 Views)

Re: Layer not showing in Viewport

12-13-2012 04:37 AM in reply to: butters4life24

Is the layer 'frozen in current viewport'?  Which is different from the main frozen/thaw setting.

ITO - Application Management
AutoCAD 2014 | Inventor Professional 2014 | Vault Professional 2014

*Expert Elite*
Posts: 5,853
Registered: ‎05-21-2003
Message 4 of 4 (155 Views)

Re: Layer not showing in Viewport

12-13-2012 05:31 AM in reply to: butters4life24

They may be blocks. The blocks may be inserted on the layer A-Room-Iden, but the entities that make up the block may be on a layer that is frozen in that Viewport.

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.