AutoCAD 2010/2011/2012

Reply
Active Contributor
Giorgi_Jam
Posts: 29
Registered: ‎10-03-2010
Message 1 of 16 (1,879 Views)
Accepted Solution

Hatches for Geological Units

1879 Views, 15 Replies
03-26-2012 01:39 PM

Dear All,

 

I will appreciate it much if you either:

 

a) can send me geological elements hatching patterns in .PAT format to g.jamalashvili@gmail.com (e.g. hatch for tuffs, basalt, tuff breccia, andesite, dacite, diabase, etc), or

b) advise web-sites where I can dowload them or otherwise buy them quickly...

 

Thank you for any assistance.

 

Regards,

 

Giorgi

I believe this is it, volume 2 has the PAT files I think.

 

http://www.saj.usace.army.mil/Divisions/Engineering/CADD_MmgtSup_TriSrvc_StandGuide.htm

Try here instead

https://cadbim.usace.army.mil/CAD

Its under links->downlads->general downloads->symbols
Valued Mentor
TerryDotson
Posts: 486
Registered: ‎06-06-2010
Message 2 of 16 (1,842 Views)

Re: Hatches for Geological Units

03-27-2012 08:31 AM in reply to: Giorgi_Jam
Active Contributor
Giorgi_Jam
Posts: 29
Registered: ‎10-03-2010
Message 3 of 16 (1,828 Views)

Re: Hatches for Geological Units

03-27-2012 11:05 PM in reply to: TerryDotson

Thank you so much for your link, however there in only PDF file available for download...

Active Contributor
Giorgi_Jam
Posts: 29
Registered: ‎10-03-2010
Message 4 of 16 (1,827 Views)

Re: Hatches for Geological Units

03-27-2012 11:16 PM in reply to: TerryDotson

I have sent anyway an e-mail to the Engineers asking if they sell these patterns... let's wait for their reply... Do you have any other suggestions? Thanks a lot!

Contributor
mikeharris17
Posts: 16
Registered: ‎02-29-2012
Message 5 of 16 (1,813 Views)

Re: Hatches for Geological Units

03-29-2012 08:06 PM in reply to: Giorgi_Jam
Try here instead

https://cadbim.usace.army.mil/CAD

Its under links->downlads->general downloads->symbols
Active Contributor
Giorgi_Jam
Posts: 29
Registered: ‎10-03-2010
Message 6 of 16 (1,810 Views)

Re: Hatches for Geological Units

03-29-2012 11:15 PM in reply to: mikeharris17

Dear mikeharris17,

 

Thank you so much for your link - this was exactly what I was searching for.

 

Regards, Giorgi

Active Contributor
Giorgi_Jam
Posts: 29
Registered: ‎10-03-2010
Message 7 of 16 (1,808 Views)

Re: Hatches for Geological Units

03-29-2012 11:17 PM in reply to: TerryDotson

Dear Terry Dotson,

 

You were correct - the PAT files could be found on the site mentioned by you... Thank you for your assistance.

 

Regards,

 

Giorgi

Member
GeoCad2011
Posts: 4
Registered: ‎04-29-2012
Message 8 of 16 (1,759 Views)

Re: Hatches for Geological Units

04-29-2012 09:14 PM in reply to: Giorgi_Jam

Dear mikeharris17,

 

Thank you so much for your link, but I can't enter in the page. Can you give me other link?.

 

Thanks

Contributor
mikeharris17
Posts: 16
Registered: ‎02-29-2012
Message 9 of 16 (1,749 Views)

Re: Hatches for Geological Units

04-30-2012 06:55 AM in reply to: Giorgi_Jam
I don't have another link. The military sites usually have certificate issues. You may have to choose to proceed without a trusted certificate, or perhaps you can use a different browser.
Member
GeoCad2011
Posts: 4
Registered: ‎04-29-2012
Message 10 of 16 (1,731 Views)

Re: Hatches for Geological Units

05-01-2012 04:46 PM in reply to: Giorgi_Jam
Hi everyone. Can send me geological elements hatching patterns in .PAT format to juanchomera@hotmail.com? Is urgent. Thank you.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.