AutoCAD 2010/2011/2012

Reply
Active Contributor
Giorgi_Jam
Posts: 29
Registered: ‎10-03-2010
Message 1 of 16 (1,925 Views)
Accepted Solution

Hatches for Geological Units

1925 Views, 15 Replies
03-26-2012 01:39 PM

Dear All,

 

I will appreciate it much if you either:

 

a) can send me geological elements hatching patterns in .PAT format to g.jamalashvili@gmail.com (e.g. hatch for tuffs, basalt, tuff breccia, andesite, dacite, diabase, etc), or

b) advise web-sites where I can dowload them or otherwise buy them quickly...

 

Thank you for any assistance.

 

Regards,

 

Giorgi

I believe this is it, volume 2 has the PAT files I think.

 

http://www.saj.usace.army.mil/Divisions/Engineering/CADD_MmgtSup_TriSrvc_StandGuide.htm

Try here instead

https://cadbim.usace.army.mil/CAD

Its under links->downlads->general downloads->symbols
Valued Mentor
TerryDotson
Posts: 488
Registered: ‎06-06-2010
Message 2 of 16 (1,888 Views)

Re: Hatches for Geological Units

03-27-2012 08:31 AM in reply to: Giorgi_Jam
Active Contributor
Giorgi_Jam
Posts: 29
Registered: ‎10-03-2010
Message 3 of 16 (1,874 Views)

Re: Hatches for Geological Units

03-27-2012 11:05 PM in reply to: TerryDotson

Thank you so much for your link, however there in only PDF file available for download...

Active Contributor
Giorgi_Jam
Posts: 29
Registered: ‎10-03-2010
Message 4 of 16 (1,873 Views)

Re: Hatches for Geological Units

03-27-2012 11:16 PM in reply to: TerryDotson

I have sent anyway an e-mail to the Engineers asking if they sell these patterns... let's wait for their reply... Do you have any other suggestions? Thanks a lot!

Contributor
mikeharris17
Posts: 16
Registered: ‎02-29-2012
Message 5 of 16 (1,859 Views)

Re: Hatches for Geological Units

03-29-2012 08:06 PM in reply to: Giorgi_Jam
Try here instead

https://cadbim.usace.army.mil/CAD

Its under links->downlads->general downloads->symbols
Active Contributor
Giorgi_Jam
Posts: 29
Registered: ‎10-03-2010
Message 6 of 16 (1,856 Views)

Re: Hatches for Geological Units

03-29-2012 11:15 PM in reply to: mikeharris17

Dear mikeharris17,

 

Thank you so much for your link - this was exactly what I was searching for.

 

Regards, Giorgi

Active Contributor
Giorgi_Jam
Posts: 29
Registered: ‎10-03-2010
Message 7 of 16 (1,854 Views)

Re: Hatches for Geological Units

03-29-2012 11:17 PM in reply to: TerryDotson

Dear Terry Dotson,

 

You were correct - the PAT files could be found on the site mentioned by you... Thank you for your assistance.

 

Regards,

 

Giorgi

Member
GeoCad2011
Posts: 4
Registered: ‎04-29-2012
Message 8 of 16 (1,805 Views)

Re: Hatches for Geological Units

04-29-2012 09:14 PM in reply to: Giorgi_Jam

Dear mikeharris17,

 

Thank you so much for your link, but I can't enter in the page. Can you give me other link?.

 

Thanks

Contributor
mikeharris17
Posts: 16
Registered: ‎02-29-2012
Message 9 of 16 (1,795 Views)

Re: Hatches for Geological Units

04-30-2012 06:55 AM in reply to: Giorgi_Jam
I don't have another link. The military sites usually have certificate issues. You may have to choose to proceed without a trusted certificate, or perhaps you can use a different browser.
Member
GeoCad2011
Posts: 4
Registered: ‎04-29-2012
Message 10 of 16 (1,777 Views)

Re: Hatches for Geological Units

05-01-2012 04:46 PM in reply to: Giorgi_Jam
Hi everyone. Can send me geological elements hatching patterns in .PAT format to juanchomera@hotmail.com? Is urgent. Thank you.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.