The next version will be one for mac, but at the moment i have my version 2012 for windows.
So I'm using bootcamp.
In my opiniun it's only a driver witch is missing.
The Intel HD series of cards all have the same model number. The only integrated version supported is the version for workstations. All other versions are laptop cards. Our testing shows the workstation card to be certified, but the laptop cards are not. Unfortunately the workstation version was tested and certified first. The older certified hardware list shows that model as being a certified card. Since there is only 1 model number, the software cannot differentiate between flavors. The laptop versions are not certifiable. There are more laptop versions than the workstation version. In 2011 Update 1.1, we changed the Hardware Certification List to reflect the current status of that model number to reflect the more common versions. It is no longer certified, and therefore Hardware Acceleration is disabled. Our developers are aware and working on this issue.
My Intel HD Graphics card has a different model number than what is listed in the AdskHwCertificationDatabase.xml.
I am using an early 2011 MacBook Pro, 13" model. I boot into Windows 7 using Bootcamp. I am using Autodesk Product Desigb Suite 2012. Autodesk Inventor Professional 2012 recognizes the card and enabled hardware acceleration, but AutoCAD Mechanical 2012 does not.
Pulled from Device Manager
There are no AlternateId's specified for the 290 <card> XML element within AdskHwCertificationDatabase.xml.
Am I understanding you correctly, that you're saying that the issue is simply that the required XML entry into the AdskHwCertificationDatabase.xml file is missing? If so, could the appropriate information be manually typed into the AdskHwCertificationDatabase.xml file? While looking through the file, I see several "<!--this next section is hardcoded for the time being.-->" comments.
Certified does not mean it works properly.
The Certified Hardware page does list the Intel HD Graphics 3000 chipset as being supported, which is what is in the MacBook that I'm using.
This is the result of me testing all of the products within Autodesk Product Design Suite 2012 that I normally use:
Graphical Hardware Acceleration Active
Graphical Hardware Acceleration Inactive
From this, it seems to me that the problem isn't within the hardware or drivers, but the AutoCAD product specifically. I tried modifying the XML file to include information about the GPU, but it had no effect. If I were to speculate on where the problem is rooted at, I'd say it was within AutoCAD's programming that detects GPUs; "hardcoded" graphics card information within the AutoCAD product gives a bit of support to this speculation.
Has anyone had success with another CAD product, such as VectorWorks?
I´ve installed Windows 7 x64 with bootcamp in my MBP 13" i7, this one comes with the INTEL HD 3000 G.card....
when I use Autocad on Win I cant turn on the Hardware accelerator function either, ITS OBVIOUSLY A DRIVER ERROR. couse I can run 3Dmax smoothly.
On the other hand, on mac os I also have autocad for mac and and runs really good. I have read that this situation is global. Autodesk has to fix this soon!!!!
Access a broad range of knowledge to help get the most out of your products and services.