AutoCAD 2010/2011/2012

Reply
Contributor
valeryschorstein1478
Posts: 14
Registered: ‎02-25-2009
Message 1 of 5 (399 Views)

Dynamic Block Problem

399 Views, 4 Replies
08-02-2011 12:47 PM

Please, help.

I've got Dynamic Block called 'Flange'. When I'm trying to change it to another dimension,

from original 6", I got this block the wrong way - please see attachments.

Same block, though works in other drawings.

Thanks in advance.

Product Support
luconceicao
Posts: 583
Registered: ‎11-07-2007
Message 2 of 5 (294 Views)

Re: Dynamic Block Problem

08-04-2011 06:58 AM in reply to: valeryschorstein1478

Please send the block so that we can have a look.

 

Cheers,

Luciane

 

Luciane Conceicao
Product Support Specialist
Autodesk, Inc.

Contributor
valeryschorstein1478
Posts: 14
Registered: ‎02-25-2009
Message 3 of 5 (289 Views)

Re: Dynamic Block Problem

08-04-2011 07:26 AM in reply to: valeryschorstein1478

Thanks for your help. Here's this block.

Please don't forget, that when I insert this block from

tool pallet in other drawings it's working.

*Pro
nestly
Posts: 1,283
Registered: ‎09-03-2010
Message 4 of 5 (277 Views)

Re: Dynamic Block Problem

08-04-2011 10:46 AM in reply to: valeryschorstein1478

The block is only partially contrained. Open the block editor, click "autoconstrain" and select everything.  Seems to work fine after saving the block.  The only thing I'd change is that I'd make the basepoint remain at the center of the neck regarless of size.

 

I don't see any reason why it would work better or worse when inserted from a tool palette?

Contributor
valeryschorstein1478
Posts: 14
Registered: ‎02-25-2009
Message 5 of 5 (244 Views)

Re: Dynamic Block Problem

08-10-2011 06:21 AM in reply to: valeryschorstein1478

I was out of office on field trip and didn't have a chance to check it.

Now I tried and it's working. Thank you very much.

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.