AutoCAD 2010/2011/2012

AutoCAD 2010/2011/2012

Reply
Active Member
7 Posts
0 Kudos
Registered: ‎09-23-2010
Post 1 of 5

2011 batch plotting

2653 Views, 4 Replies
09-23-2010 03:32 PM

My department has recently upgraded to AutoCAD 2011 and Windows 7. I am having issues with trying to use the batch plot when trying to plot or export to dwf or pdf. It works fine with the page setups I created and selected through "Plotter named in page setup". I don't think something is path correctly. Any help would be great. Thx.

 

 

kvs
*Expert Elite*
24,190 Posts
1,589 Kudos
Registered: ‎11-06-2003
Post 2 of 5

Re: 2011 batch plotting

09-24-2010 01:43 PM in reply to: kvansciver

Was your AutoCAD profile or content from a previous AutoCAD installation used in your R2011 setup?

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Active Member
7 Posts
0 Kudos
Registered: ‎09-23-2010
Post 3 of 5

Re: 2011 batch plotting

09-24-2010 01:56 PM in reply to: kvansciver

Yes......2008.

kvs
*Expert Elite*
24,190 Posts
1,589 Kudos
Registered: ‎11-06-2003
Post 4 of 5

Re: 2011 batch plotting

09-24-2010 02:05 PM in reply to: kvansciver

That often is a culprit: if you have the time and patience, reinstall R2011 and use a fresh 2011 profile, avoid importing anything (anything at all), and retest PUBLISH. It will work fine.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Active Member
7 Posts
0 Kudos
Registered: ‎09-23-2010
Post 5 of 5

Re: 2011 batch plotting

09-24-2010 02:10 PM in reply to: kvansciver

Thx..... I'll give it a try.

kvs
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post