AutoCAD 2007/2008/2009

AutoCAD 2007/2008/2009

Reply
Member
da.chisel
Posts: 3
Registered: ‎05-19-2011
Message 1 of 9 (5,941 Views)
Accepted Solution

Text auto-rotate problem

5941 Views, 8 Replies
05-19-2011 06:51 AM

Hi,

 

I am having a problem with inserting/editing text in simple 2D cad drawings :

When I click on MTEXT, my cursor changes to the usual text box insertion icon, but the text appears vertical (as if rotated 90º). And entering text (no matter how big or small the MTEXT box is) the text also appears vertical.

 

When I try to edit text from older drawings (done prior to having this problem), the same problem occurs : The text changes orientation and goes vertical.

 

I have to manually rotate the text back to the horizontal position every time, and it is annoying.

 

This is a problem that started occuring in the past week (no changes that I know of were made to autocad settings).

 

Help please!

 

Never use the @Arial...  Use the Arial instead.

*Expert Elite*
Patchy
Posts: 6,322
Registered: ‎09-16-2009
Message 2 of 9 (5,934 Views)

Re: Text auto-rotate problem

05-19-2011 07:19 AM in reply to: da.chisel

Attach your drawing here, let's take a look.

Member
da.chisel
Posts: 3
Registered: ‎05-19-2011
Message 3 of 9 (5,931 Views)

Re: Text auto-rotate problem

05-19-2011 07:23 AM in reply to: Patchy

Here it is..

*Expert Elite*
Patchy
Posts: 6,322
Registered: ‎09-16-2009
Message 4 of 9 (5,929 Views)

Re: Text auto-rotate problem

05-19-2011 07:33 AM in reply to: da.chisel

Never use the @Arial...  Use the Arial instead.

Member
da.chisel
Posts: 3
Registered: ‎05-19-2011
Message 5 of 9 (5,914 Views)

Re: Text auto-rotate problem

05-19-2011 07:51 AM in reply to: Patchy

Thank you :smileyhappy: This solved my issue.

 

 

New Member
daffouk
Posts: 1
Registered: ‎02-20-2012
Message 6 of 9 (5,450 Views)

Re: Text auto-rotate problem

02-20-2012 06:49 AM in reply to: da.chisel

Thanks for this answer, it solved my rotating text problem too

 

Dave

*Expert Elite*
heinsite
Posts: 880
Registered: ‎03-15-2008
Message 7 of 9 (5,421 Views)

Re: Text auto-rotate problem

02-25-2012 03:28 PM in reply to: Patchy

>... Never use the @Arial... ...<

 

... Unless you specifically *want* your text rotated 270 degrees that is.  And sometimes you just might.

 

All of the "@" fonts will do this btw.  Not just @Arial.

 

Dave

------------------------------------------------------
Dave Hein, P.E.
*Expert Elite*
JGerth
Posts: 2,225
Registered: ‎12-05-2005
Message 8 of 9 (5,374 Views)

Re: Text auto-rotate problem

03-02-2012 12:24 PM in reply to: heinsite

begs the question....what are the @something fonts?  I _only_ see them in Acad, never observed them in any other application.  and they seem to proliferate...

 

 

 

Edited by
Discussion_Admin

New Member
TIMVETTER
Posts: 1
Registered: ‎10-28-2013
Message 9 of 9 (2,602 Views)

Re: Text auto-rotate problem

10-28-2013 05:09 AM in reply to: Patchy

Thank you! I can now sleep better at night.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.