AutoCAD 2007/2008/2009

Reply
New Member
BASSPONY
Posts: 1
Registered: ‎12-03-2009
Message 1 of 4 (281 Views)

spiked letters

281 Views, 3 Replies
12-03-2009 03:21 PM
i am having a problem where the letters are spiked when i print, they appear fine on the screen but not in the plot preview. i think it has to do with the plot style, but i don't know what setting i need to change to fix it. does anyone know how i can fix this problem.
*Dean Saadallah
Message 2 of 4 (281 Views)

Re: spiked letters

12-04-2009 05:44 AM in reply to: BASSPONY
Plot style settings for those pens, what did you change there?
Undo, open some of the core plot style tables and match Line End and Line
Join selections.

--
Dean Saadallah
http://LTisACAD.blogspot.com
--
New Member
JasonWhittemore7453
Posts: 2
Registered: ‎12-23-2008
Message 3 of 4 (281 Views)

Re: spiked letters

12-04-2009 11:35 AM in reply to: BASSPONY
Try different printer drivers. We had the issue and changed printer drivers. We were using a Lexmark printer and the driver that was loaded for that printer caused the issue. We used the same Lexmark printer with a different driver; can't remember exactly which one it was but i do think it was an HP driver and it fixed the problem. It did not have anything to do within ACAD plot styles etc..
*T Bennett
Message 4 of 4 (281 Views)

Re: spiked letters

12-08-2009 08:07 AM in reply to: BASSPONY
Let me guess, it's the M, W, N, and V. Somehow your plot style settings
have been set to sharp corners. For a test, try to chose a different "Plot
style table (such as monochrome.ctb) in your page setup. See if you don't
get a different result. Don't worry about the color or quality, just verify
that your offending characters are printing correctly - ie. not spiked. If
they are still spiked, we can go from there.

Todd




"Dean Saadallah" wrote in message
news:6299436@discussion.autodesk.com...
Plot style settings for those pens, what did you change there?
Undo, open some of the core plot style tables and match Line End and Line
Join selections.

--
Dean Saadallah
http://LTisACAD.blogspot.com
--
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.