AutoCAD 2007/2008/2009

AutoCAD 2007/2008/2009

Reply
New Member
zizi.goletta
Posts: 2
Registered: ‎09-21-2012
Message 1 of 8 (500 Views)

Problems with copy and paste from different files

500 Views, 7 Replies
09-21-2012 01:50 AM

Hi everyone,

I've got some problems using copy and paste command for copy objects from different files.

Sometimes the operation take me just few seconds, sometimes (say the 70% of the times) take me more than 20mins....and it's so frustrating and boring!

I've read that could be a ram problem, but the pc is new!

I've also try to use Scalelist command, but it doesn't work......Autocad says to me that there is a "error in the system"

what can I do?I'm using an Autocad2008 version on Windows7, could be possible have a "conflictual problems" between the 2 systems?

Thank you for your helping

*Expert Elite*
pendean
Posts: 23,364
Registered: ‎11-06-2003
Message 2 of 8 (444 Views)

Re: Problems with copy and paste from different files

09-21-2012 05:22 AM in reply to: zizi.goletta

win7 is not supported for R2008, so yes that is a big deal, it means no one is trying to fix any issues.

 

But, that should not happen unless the content of your drawings are the trigger: by chance can you post a DWG with this exact problem for someone here to try?

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
New Member
zizi.goletta
Posts: 2
Registered: ‎09-21-2012
Message 3 of 8 (437 Views)

Re: Problems with copy and paste from different files

09-21-2012 06:03 AM in reply to: pendean

That's the point, win7 is not create for support cad2008..It's like I was suppose!

 

No don't worry, now that I discover the problem I'll use another pc :smileyhappy:

But anyway thank u so much!

Best regards

Active Contributor
anoopvarrghese009
Posts: 31
Registered: ‎02-14-2010
Message 4 of 8 (336 Views)

Re: Problems with copy and paste from different files

10-01-2012 09:21 AM in reply to: zizi.goletta
Contributor
tmann_008
Posts: 12
Registered: ‎09-25-2012
Message 5 of 8 (303 Views)

Re: Problems with copy and paste from different files

10-12-2012 07:03 AM in reply to: zizi.goletta

Im working on 2008 CAD and simple copy and paste in the draing takes forever. I tried the lisp command but nothing changed. still have to wait for simple copy and past... whats up with this?

Contributor
tmann_008
Posts: 12
Registered: ‎09-25-2012
Message 6 of 8 (302 Views)

Re: Problems with copy and paste from different files

10-12-2012 07:04 AM in reply to: anoopvarrghese009

Im on Win XP 64bit

Active Contributor
anoopvarrghese009
Posts: 31
Registered: ‎02-14-2010
Message 7 of 8 (292 Views)

Re: Problems with copy and paste from different files

10-12-2012 08:42 PM in reply to: zizi.goletta

Command: -SCALELISTEDIT

 

Reset, Enter

Yes, Enter

 Exit

 

Do this steep in Both Drawing.

 

Then Try.

 

    This command available Auto Cad 2008 and above only

http://lispandtips.blogspot.com/2012/10/copy-and-paste-from-different-files.html

*Expert Elite*
Icemanau
Posts: 1,037
Registered: ‎06-01-2010
Message 8 of 8 (271 Views)

Re: Problems with copy and paste from different files

10-15-2012 07:28 PM in reply to: anoopvarrghese009

I've recently upgraded the computer I use and it came with Win 7 Professional 64 bit. To install ACAD 2008, I used the XP Mode which sets up a virtual machince running XP. I then installed ACAD into this virtual machine so I have the better OS running for everything else and ACAD running in the old 32 bit OS with no conflict issues. Althoug I do have to find the latest accepted video card list from Autodesk and install it for the performence settings to work properly.

 

Regards Brad

Icemanau (NNTP handle: Brad Coleman)


Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!