AutoCAD 2007/2008/2009

AutoCAD 2007/2008/2009

Reply
Member
OzzNick
Posts: 4
Registered: ‎09-17-2012
Message 1 of 6 (696 Views)

DGN TO DWG ISSUES

696 Views, 5 Replies
09-17-2012 10:07 AM

Hey,

 

I work for a very large Electrical company in Toronto and we are having problems with one of our major clients (happens to be one of the biggest design construction companies in Toronto).

 

They designed the job with Microstation and the contractor and sub trades on site all use Autocad. However we have to edit all the original drawings from the designer with Autocad to do the as built drawings and then transfer them back into DGN for the submittals.

 

However despite all our efforts every time we transfer them in Autocad the text alignment is off. including the dimensions which for what ever reason show up upside down???

 

Now we are talking about thousands of drawings here so if anyone can help with an easy way to convert files from dgn to dwg and have it work out perfectly that would be amazing.

 

Thanks,

*Expert Elite*
Patchy
Posts: 6,318
Registered: ‎09-16-2009
Message 2 of 6 (690 Views)

Re: DGN TO DWG ISSUES

09-17-2012 10:57 AM in reply to: OzzNick

Attach a dgn and let's take a look

*Expert Elite*
Patchy
Posts: 6,318
Registered: ‎09-16-2009
Message 3 of 6 (681 Views)

Re: DGN TO DWG ISSUES

09-17-2012 11:55 AM in reply to: OzzNick

Your autocad drawing was in the wrong UCS that's why.

Member
OzzNick
Posts: 4
Registered: ‎09-17-2012
Message 4 of 6 (653 Views)

Re: DGN TO DWG ISSUES

09-19-2012 04:42 AM in reply to: Patchy

How were you able to transfer that with all the proper colours and line weights as well? Excuse my lack of noledge on this but we don't usually work with Microstation.

*Expert Elite*
Patchy
Posts: 6,318
Registered: ‎09-16-2009
Message 5 of 6 (647 Views)

Re: DGN TO DWG ISSUES

09-19-2012 07:09 AM in reply to: OzzNick

Since you deleted your attachment, I forgot what I did.

There are 2 ways, open .dgn with MS and save as .dwg or DGNimport with Autocad.

 

Member
Chanschans
Posts: 5
Registered: ‎02-09-2014
Message 6 of 6 (178 Views)

Re: DGN TO DWG ISSUES

02-09-2014 01:37 AM in reply to: OzzNick

 

there is a tool for this : http://www.youtube.com/watch?v=cvBiFTWx_8I

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.