AutoCAD 2007/2008/2009

AutoCAD 2007/2008/2009

Reply
New Member
alvinkoetsier
Posts: 2
Registered: ‎07-26-2011
Message 1 of 4 (332 Views)

AutoCAD 2009 version not readible ?

332 Views, 3 Replies
07-26-2011 02:09 AM

Hi guys,

 

I am new here but i have an urgent question which needs to be solved.

I use Meridian , a piece of software which attaches an Autocad 2009 dwg to a Tiff file which will be edited in Raster Design.

This added DWG can not be opened in acad 2009.

So when i open the file in notepad it says at start says II* , which needed to be AC1021 ?

Can anybody tell me if II* is another acad version , or is the file corrupted ?

Before we had this problem also with Acad 2002 , and we converted it with dwg trueview and it al worked fine, so if trueview could read it , it should be an autocad compatible file.

 

Please help!

 

Thanks in advance

 

Regards,

Alvin

*Expert Elite*
pendean
Posts: 23,698
Registered: ‎11-06-2003
Message 2 of 4 (305 Views)

Re: AutoCAD 2009 version not readible ?

07-26-2011 12:39 PM in reply to: alvinkoetsier

Appears to be a dead/corrupt file: post it here for confirmation.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
New Member
alvinkoetsier
Posts: 2
Registered: ‎07-26-2011
Message 3 of 4 (299 Views)

Re: AutoCAD 2009 version not readible ?

07-26-2011 10:45 PM in reply to: pendean

Hi pendean , thank you for your reply!

I have attached one of the dwg files which i cant open.

 

If you read this article you can find all autocad version codes which appear in the beginning of the dwg file when opened in notepad. http://en.wikipedia.org/wiki/.dwg

 

I would love to hear you findings

 

Regards,

Alvin

The Netherlands

*Expert Elite*
pendean
Posts: 23,698
Registered: ‎11-06-2003
Message 4 of 4 (290 Views)

Re: AutoCAD 2009 version not readible ?

07-27-2011 06:22 AM in reply to: alvinkoetsier

You have a dead file according to AutoCAD 2011-2012: there is nothing to recover with those programs. Sorry.

My other two dwg-capable apps gave it a hard try but ultimately decided it was not valid either.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.