AutoCAD 2004/2005/2006

Reply
Contributor
jdf0911
Posts: 17
Registered: ‎03-28-2006
Message 1 of 5 (107 Views)

Associative Hatch

107 Views, 4 Replies
04-10-2006 04:26 PM
Whenever I use an associative hatch and then have to erase that hatch later, it erases my walls or the object I was hatching. Regen does not bring the walls or objects back. Any suggestions other than not using associative hatch.
*Heather
Message 2 of 5 (107 Views)

Re: Associative Hatch

04-10-2006 04:33 PM in reply to: jdf0911
You need to "unassociate" the hatch before you erase it.
When you select an associated hatch you also select everything it is
associated with.
If you select the hatch and then look at (open) the properties pallet you
will see it says "all (x)" if you look in that pull down and go to the
"hatch" item you can set "associative" to "no".
Now deselect (esc) and click on the hatch again. You should only "hatch" at
the top of the properties pallet. Now you can delete it without loosing
everything.

Hope this helps,
Heather


wrote in message news:5138263@discussion.autodesk.com...
Whenever I use an associative hatch and then have to erase that hatch later,
it erases my walls or the object I was hatching. Regen does not bring the
walls or objects back. Any suggestions other than not using associative
hatch.
Contributor
jdf0911
Posts: 17
Registered: ‎03-28-2006
Message 3 of 5 (107 Views)

Re: Associative Hatch

04-10-2006 04:47 PM in reply to: jdf0911
Thanks I'll try that.
*Pro
murray-clack
Posts: 1,804
Registered: ‎12-08-2003
Message 4 of 5 (107 Views)

Re: Associative Hatch

04-11-2006 12:16 PM in reply to: jdf0911
Also try setting PICKSTYLE to a value of 0
Contributor
jdf0911
Posts: 17
Registered: ‎03-28-2006
Message 5 of 5 (107 Views)

Re: Associative Hatch

04-11-2006 12:47 PM in reply to: jdf0911
Thank you, that works perfectly.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.