AutoCAD 2000/2000i/2002 Archive

AutoCAD 2000/2000i/2002 Archive

Reply
Contributor
kylegoltsch
Posts: 17
Registered: ‎07-22-2011
Message 1 of 6 (749 Views)
Accepted Solution

simple dxf file 8 mb

749 Views, 5 Replies
07-30-2011 08:30 AM

i have about 12,000 dxf files and some are simple parts with 3 lines, 1 hole and i line of simple text.  the file is 8,126 kb.  I know this is huge.  i have purged everything and tried wblock, picked each individual object and inserted into a new file.  same result.  i cannot figure out how to reduce the size.  there is something hidden that i cannot find.  i have attached a file for anyone to view.  any help will be appreciated.  i zipped the file because the autodesk web site would not let me post it.

Found out it was the layer filters.  Must have been near a thousand on some files.  Found the lsp file lfd.lsp on another site.  It deletes all the layer filters.  Files are now in the area of 22 kb.

*Expert Elite*
azrdgldr
Posts: 1,250
Registered: ‎01-09-2007
Message 2 of 6 (739 Views)

Re: simple dxf file 8 mb

07-30-2011 02:37 PM in reply to: kylegoltsch

I reduced it by a little bit, very little bit.  I removed unused dimstyle and text styles.  I searched for blank text and found nothing.  I would say it is the way it is.

Employee
artc2
Posts: 229
Registered: ‎06-08-2010
Message 3 of 6 (736 Views)

Re: simple dxf file 8 mb

07-30-2011 10:37 PM in reply to: kylegoltsch

The vast majority of the file is in dictionaries and xrecords.  It looks like architectural data because there are strings such as "(structural plan)" and "fireplace walls" and "___DEMOLITION" and "___ARchitecture".

Contributor
kylegoltsch
Posts: 17
Registered: ‎07-22-2011
Message 4 of 6 (721 Views)

Re: simple dxf file 8 mb

08-01-2011 10:34 AM in reply to: kylegoltsch

Found out it was the layer filters.  Must have been near a thousand on some files.  Found the lsp file lfd.lsp on another site.  It deletes all the layer filters.  Files are now in the area of 22 kb.

New Member
norkghadsk
Posts: 1
Registered: ‎11-01-2011
Message 5 of 6 (675 Views)

Re: simple dxf file 8 mb

11-01-2011 08:20 AM in reply to: kylegoltsch

hello how do i run autodesk 2002 on windows(7) seven

after installation everything comes but the design which contains wall is not shown.

it reads as a fatal error thanks Norris

 

Contributor
kylegoltsch
Posts: 17
Registered: ‎07-22-2011
Message 6 of 6 (671 Views)

Re: simple dxf file 8 mb

11-01-2011 09:41 AM in reply to: norkghadsk
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.