AutoCAD 2000/2000i/2002 Archive (Read Only)
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Shift Deselect is Not Working

5 REPLIES 5
Reply
Message 1 of 6
lmco_syracuse
1496 Views, 5 Replies

Shift Deselect is Not Working

Hi All

I support 50 ACAD 02 users and one came to me today saying he can no longer use the shift key to deselect. I thought this had something to do with the file he was working on but a new file had the same problem. Is there a system varable to control this? Thanks in advance

Mike Ostrouch
AutoCAD Support
Lockheed-Martin
Syracuse NY
5 REPLIES 5
Message 2 of 6
Anonymous
in reply to: lmco_syracuse

PICKADD?

"lmco_syracuse" wrote in message
news:f12304f.-1@WebX.maYIadrTaRb...
> Hi All
> I support 50 ACAD 02 users and one came to me today saying he can no
longer use the shift key to deselect. I thought this had something to do
with the file he was working on but a new file had the same problem. Is
there a system varable to control this? Thanks in advance
>
> Mike Ostrouch
> AutoCAD Support
> Lockheed-Martin
> Syracuse NY
>
Message 3 of 6

I tried pick add and that was not it.
Message 4 of 6
ironhawk
in reply to: lmco_syracuse

Go to the "options" window and pick the selection tab, on the left side, is there a check mark in use shift to add?
This has to have a check mark or the value of PICKADD must be set to zero.
Message 5 of 6

Hi All, and thanks for your input but I found the problem. When Raster Design 3 is loaded on top of AutoCAD 2002 SP1 the Shift Deselect does no longer work. Something in the Raster Design 3 package seems to disable this.

Mike Ostrouch
Message 6 of 6
K1200RS
in reply to: lmco_syracuse

Mike, while in Raster select the raster tools tab on the ribbon - select the angled arrow on the insert 7 write panel to open the Raster Design options dialog box - select the User Preferences dialog box and deselect the "Shift+Left Click image select" box and hit OK.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report