Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
After working in a drawing for an hour or so, the properties box stops
working. If I continue to work it will go blank in all fields. I found that
if I close the file I'm working in and reopen it the properties box works
for awhile and then stop again. This happens with all files. Anyone else
having this problem? Or know how to fix it.
Thanks
Gerald
I was having the same problem, until it stopped working all together. They say to change the pickfirst system variable to 1, which it is already set to. I don't know, I need it fixed too. I don't want to have to reinstall.
Reinstall did not fix mine. After all the trouble
of removing any mention of acad from the system registry, I thought a new
install would fix it. Practically wiped my harddrive clean and started from
scratch. Might be time to steal the Etch-a-sketch from the kids.
I
was having the same problem, until it stopped working all together. They say
to change the pickfirst system variable to 1, which it is already set to. I
don't know, I need it fixed too. I don't want to have to
reinstall.
I have the same problem with mdt6. I posted it in
the mdt6 group but never found a solution. Is anyone from adesk reading these. I
know this has been an ongoing problem in previous versions but I don't know that
it has ever been resolved
Reinstall did not fix mine. After all the trouble
of removing any mention of acad from the system registry, I thought a new
install would fix it. Practically wiped my harddrive clean and started from
scratch. Might be time to steal the Etch-a-sketch from the kids.
I
was having the same problem, until it stopped working all together. They say
to change the pickfirst system variable to 1, which it is already set to. I
don't know, I need it fixed too. I don't want to have to
reinstall.
I have had this problem for about a month, and eventually found the solution in the 2000 Newsgroup. Go to Document TS42573 in the Knowledge Base, from which you can down load a patch called OPMFIX.EXE, it was written for 2000i but it patched mine OK.
I
have had this problem for about a month, and eventually found the solution in
the 2000 Newsgroup. Go to Document TS42573 in the Knowledge Base, from which
you can down load a patch called OPMFIX.EXE, it was written for 2000i but it
patched mine OK.
