Modeling Operation Error

[Anonymous]

Good day all,

First off I want to apologize for cross posting, but I received no response in the ADT3 forum. Here goes...

One of my users is having a problem opening a drawing. Repeatedly getting the following at about 87% opening when Modeler DLLs are being loaded. It is a 2D drawing. I get the same message on my station. Modeling operation error. Unexpected end of restore file The drawing hangs and the AutoCAD session must be terminated.

Tried recovering, Inserting as a block. I attached as an Xref, but crashed when binding. Couldn't find anything constructive in the archives. Details...R2002 w/ADT R3.3 Pentium 4 2.4 mb 1 gb ram Windows 2000 I know others have encountered this, but have not found a solution. Any suggestions would be appreciated. Thanks.

[Anonymous]

You could try doing a partial open w/ an extents view and all references
unloaded. It's worked for me a few times.



"adgn" wrote in message
news:f18365d.-1@WebX.maYIadrTaRb...
Good day all,
First off I want to apologize for cross posting, but I received no response
in the ADT3 forum. Here goes...
One of my users is having a problem opening a drawing. Repeatedly getting
the following at about 87% opening when Modeler DLLs are being loaded. It is
a 2D drawing. I get the same message on my station. Modeling operation
error. Unexpected end of restore file The drawing hangs and the AutoCAD
session must be terminated.
Tried recovering, Inserting as a block. I attached as an Xref, but crashed
when binding. Couldn't find anything constructive in the archives.
Details...R2002 w/ADT R3.3 Pentium 4 2.4 mb 1 gb ram Windows 2000 I know
others have encountered this, but have not found a solution. Any suggestions
would be appreciated. Thanks.

[Anonymous]

If partial open does not work, you could have a corrupt 'dead' file. Might
want to ask your reseller if they can help fix it, or post here in Customer
Files and maybe someone can take a look.

--
Dean Saadallah
Add-on products for LT
http://www.pendean.com/lt
--