AutoCAD 2000/2000i/2002 Archive

Reply
*Meives, Michael
Message 1 of 5 (60 Views)

ellipse, tangent

60 Views, 4 Replies
12-13-2000 10:31 PM
Is there a way to accurately draw a line tangent to an ellipse.
mike
*Tom
Message 2 of 5 (60 Views)

Re: ellipse, tangent

12-13-2000 10:47 PM in reply to: *Meives, Michael
Have you tried the "TANgent" OSNAP?
"Michael Meives" wrote in message
news:ef5b32e.-1@WebX.SaUCah8kaAW...
> Is there a way to accurately draw a line tangent to an ellipse.
> mike
>
*Meives, Michael
Message 3 of 5 (60 Views)

Re:

12-14-2000 12:40 AM in reply to: *Meives, Michael
That's fine for a single point, but does not seem to pick the proper point
if you try to snap between two ellipse's
"Tom" wrote in message
news:850BE5034C9921FFD05527BDAAB20153@in.WebX.SaUCah8kaAW...
> Have you tried the "TANgent" OSNAP?
> "Michael Meives" wrote in message
> news:ef5b32e.-1@WebX.SaUCah8kaAW...
> > Is there a way to accurately draw a line tangent to an ellipse.
> > mike
> >
>
*Thoemmes, Alex
Message 4 of 5 (60 Views)

Re:

12-14-2000 04:14 AM in reply to: *Meives, Michael
To get a tangent between two ellipses, use the xline command and osnap
tangent.

Alex

Michael Meives wrote in message
news:92B8366820FBD543BFAFF4C138D48E39@in.WebX.SaUCah8kaAW...
> That's fine for a single point, but does not seem to pick the proper point
> if you try to snap between two ellipse's
> "Tom" wrote in message
> news:850BE5034C9921FFD05527BDAAB20153@in.WebX.SaUCah8kaAW...
> > Have you tried the "TANgent" OSNAP?
> > "Michael Meives" wrote in message
> > news:ef5b32e.-1@WebX.SaUCah8kaAW...
> > > Is there a way to accurately draw a line tangent to an ellipse.
> > > mike
> > >
> >
>
*Meives, Michael
Message 5 of 5 (60 Views)

Re:

12-14-2000 05:47 AM in reply to: *Meives, Michael
That does the trick
Thank You!
"Alex Thoemmes" wrote in message
news:061F97691AF7608D4CEB1247380C73F4@in.WebX.SaUCah8kaAW...
> To get a tangent between two ellipses, use the xline command and osnap
> tangent.
>
> Alex
>
> Michael Meives wrote in message
> news:92B8366820FBD543BFAFF4C138D48E39@in.WebX.SaUCah8kaAW...
> > That's fine for a single point, but does not seem to pick the proper
point
> > if you try to snap between two ellipse's
> > "Tom" wrote in message
> > news:850BE5034C9921FFD05527BDAAB20153@in.WebX.SaUCah8kaAW...
> > > Have you tried the "TANgent" OSNAP?
> > > "Michael Meives" wrote in message
> > > news:ef5b32e.-1@WebX.SaUCah8kaAW...
> > > > Is there a way to accurately draw a line tangent to an ellipse.
> > > > mike
> > > >
> > >
> >
>
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.