Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
After installing my sumagraphics digitizer and calcomp driver (tweser2kxp) I am unable to configure my tablet. When I enter the "tablet" command it says "your pointing device cannot be used as a tablet".
I can see that my digitizer works to the point that the puck moves the cusror on the screen.
The error message means your driver is not being recognized as one belonging
to a tablet. AutoCAD will not fix this, you need a driver that AutoCAD can
use as a tablet, not a mouse (why it moves on screen, because Windows sees
it as a mouse driver).
Go to "Options", in the "System" tab, look for the section called "Current
pointing device" and change it from "Current system pointing device" to
"Wintab Compatible Digitizer...".
Also, if you still have a mouse connected as well, make sure that "Accept
input from:" below that is set to the "Digitizer and mouse" option. The
"Digitizer only" option will make nothing work.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")