I have posted an update that improves functionality and extends the technology preview to March 15, 2013.
Scott, must 3D objects have thickness? Is it possible to analyze 3D surfaces without thickness?
When I take de 3D+Drag option, it just skip entrance and return to standard 3D analysis.
Are there more detailed .pdf files about usage?
Any intention to the future for adding Lift analysis?
I have downloaded the latest but cannot get it to run on my machine...
You should see flow move around 3D surfaces with no thickness. If you're not seeing it, I'm curious to know what the geometry looks like.
Not picturing what you described with the 3D+Drag and 3D analysis. Have you tried "thickening" the surfaces in CAD just to see if it makes a difference?
The basic help documentation is now built into Falcon, accessible through the"i" icon at the top of the screen.
Thanks for the feedback on lift. Lift is not part of this update but has been discussed.
Hi John - your system is similar to many others that are running it successfully. Curious when you see the issue? Is it immediately on startup? Also, what is the name of the downloaded *.zip folder you used? Some very small tweaks were recently made so l'm curious if you have the latest.
Hi Hartogj, thanks for your anser!. Surfaces without thikness work fine at first glance but, at least at the first minutes of work, I see exactly the same colours at the same places in both sides (windward and leeward) of the sails. That shouldn't be correct, as leeward face of sails should have a bigger (negative) pressure on the forward part than the same forward part at the windward side, where pressure should be positive and lower (in abolute value).
The poblem of 3D+Drag depends on how lucky I feel: sometimes, after some minutes of 3D common work, it do enters 3D+Drag without problem, sometimes it don't.
Another question: I'm working with .obj format in Meters and it works fine, but there's no way to check for sizes, an 8m lenght boat looks smaller than the default 5m lenght car, so there must be something bad in scale, but I can't check for dimensions into Falcon. A simple correction before importing the .obj file could solve the problem, but I can't measure into Falcon to know what scale factor should I use.
Unfortunately, the system don't allow to save a file together with his configurations, otherwise I could attach the file for checking.
The folder name of the extracted files is ProjectFalcon5...
Access a broad range of knowledge to help get the most out of your products and services.