I had a perfectly wonderful Vault Pro 2013 server install. I uninstalled and returned to 2012 (please don't ask, the pain is too great at this point)
IIS configuration set to ASP 4.0
2012 would not install properly (29001 error code Connectivity)
We decided to go back to 2013.
Uninstall all SQL.
Installed fresh 2008 R2 Express
Vault install failure
Install 2008 R2 SP1
Vault Install Failure
Put IIS config back to ASP 2.0 (cracking the Vault suggestion)
Vault Install Failure
Put IIS config back to ASP 4.0 (cracking the Vault suggestion)
reinstall and register .NET 4.0 (Discussion suggestion)
Vault Install Failure
I could use some good suggestions here. The log show the failure at the Language section, and the error is the 29001 cannot load 'Connectivity.Content'
Solved! Go to Solution.
Do you still want to go back to 2012 or are you planning on moving to 2013? In essence, I am trying to figure out which installer that you want to work since both have subtle differences. Whichever install you are using, I am making the assumption that it is making it beyond the Pre-Checks. Is it possible to get more of the text around the install issue from the log file? I know there usually isn't much there but it could help with suggestions.
Pre checks all good. Install gets 10 minutes out and bails.
2013 is the target, but there was a suggestion that we kill a perfectly good install of 2013 server and retrograde to get some old data, and then migrate forward.
What I need to do is get to work. So I need 2013 back. I'm thinking about scrapping it all again, and installing from from the install. I didn't have any problem before.
Local server - 2013 Pro - 64 bit Win 7
Here is some of the log file:
2012/9/20:13:25:36 JEvans JOHN-EVANS === Setup started on JOHN-EVANS by JEvans ===
2012/9/20:13:25:36 JEvans JOHN-EVANS Launch
2012/9/20:13:25:40 JEvans JOHN-EVANS PageOpen InstallDotNetDialog
2012/9/20:13:25:40 JEvans JOHN-EVANS PageOpen LaunchDialog
2012/9/20:13:26:22 JEvans JOHN-EVANS PageOpen LicenseDialog
2012/9/20:13:26:25 JEvans JOHN-EVANS PageOpen ProductInfoDialog
2012/9/20:13:27:02 JEvans JOHN-EVANS PageOpen ProductSelectionDialog2
2012/9/20:13:27:11 JEvans JOHN-EVANS PageOpen FullProgressDialog
2012/9/20:13:27:11 JEvans JOHN-EVANS Installing ADMS System Check: F:\Adsk_Vault_P_Server_2013_64bit\x86\en-us\edmpre
2012/9/20:13:27:38 JEvans JOHN-EVANS Install ADMS System Check Succeeded
2012/9/20:13:27:39 JEvans JOHN-EVANS Installing Autodesk® Vault Professional 2013 (Server): TRANSFORMS="F:\Adsk_Vault_P_Server_2013_64bit\x64\
2012/9/20:13:29:53 JEvans JOHN-EVANS Install Autodesk® Vault Professional 2013 (Server) Succeeded
2012/9/20:13:29:54 JEvans JOHN-EVANS Installing Autodesk® Vault Professional 2013 (Server) Language Pack: TRANSFORMS="C:\Users\JEVANS~1.GCT\AppData\Local\Te
2012/9/20:13:30:29 JEvans JOHN-EVANS Install Autodesk® Vault Professional 2013 (Server) Language Pack Failed Installation aborted, Result=1603
2012/9/20:13:31:30 JEvans JOHN-EVANS Rollback Autodesk® Vault Professional 2013 (Server) Succeeded
2012/9/20:13:31:33 JEvans JOHN-EVANS PageOpen InstallCompleteDialog
2012/9/20:13:56:39 JEvans JOHN-EVANS === Setup ended ===
Hope this helps.
One thing to mention. I did leave SQL 3.5 Express on there because it seemed to house my desktop content center stuff for Inventor. Should I klill that too?
I have done everything I can think of, including the .NET cleanup, SQL kill all, and VC uninstall. Everything goes well until Vault language packs install. Fail every time.
Are you running the install from a local directory (something outside the DVD rom)? I am thinking that you might be hitting a long install path issue. Is it possible to rename the folder to something smaller? I do agree that your last step blowing everything away should have cleared things up.
Go to IIS, Application Pools, DefaultAppPool, Advanced Settings.
You will see "Enable 32-Bit Application" make sure this is set to True.
I will do that, but the cracking the vault article recently pointed out that this should be set to false.
I have 64 bit OS and 64 bit SQL 2008 R2 Express install
BTW, the long file name thing did not help. Thanks anyhow fellas.
I completely wiped all C++, sql instances, erased any SQL folders, did the .NET cleanup
Rebooted, and started install.
Ended up with exact same error.
Ok, so I forced the install down after the vault was installed during the install process.
I can get into adms, add vaults, etc.
What I cannot do is start the vault server agent service.
They fail with the same IIS problem, Connectivity,content wont load
Anyone know how to get past this?
Start with some of our most frequented solutions to get help installing your software.
Upgrading to a 2015 product? Make sure to check these out 1st!