Community
Vault Forum
Welcome to Autodesk’s Vault Forums. Share your knowledge, ask questions, and explore popular Vault topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Multiple Vaults and ADMS

4 REPLIES 4
SOLVED
Reply
Message 1 of 5
rob.j.ross
415 Views, 4 Replies

Multiple Vaults and ADMS

I would like to set up a second vault independent of the vault we use now but am not sure how to go about this.  I set up the original vault many years ago and remember using ADMS but do not have ADMS installed now.  We are using vault 2014 basic.  My questions:

 

Is ADMS what I need to add a second vault?

Where do I install ADMS from?

Is a higher version of vault required to have more than 1 vault?


Thanks.

____________________________
Inventor Professional 2014 64 Bit
Windows 7 Professional
NVIDIA Quadro FX 4600
Dual Intel Xeon E5540 CPUs
16GB DDR3 Ram
4 REPLIES 4
Message 2 of 5
cbenner
in reply to: rob.j.ross
Message 3 of 5
rob.j.ross
in reply to: cbenner

How is ADMS accessed on the vault server?

____________________________
Inventor Professional 2014 64 Bit
Windows 7 Professional
NVIDIA Quadro FX 4600
Dual Intel Xeon E5540 CPUs
16GB DDR3 Ram
Message 4 of 5
cbenner
in reply to: rob.j.ross

There should be a desktop shortcut for it.  If not, go to the start menu and type ADMS in the search window. Or Autodesk Data Management.

 

Are you the Vault administrator?  Because you probably ought to know a bit about the ADMS to manage Vault, run backups etc.

Message 5 of 5
rob.j.ross
in reply to: cbenner

For some reason I thought ADMS was installed on the client side.  I have it straight now.

____________________________
Inventor Professional 2014 64 Bit
Windows 7 Professional
NVIDIA Quadro FX 4600
Dual Intel Xeon E5540 CPUs
16GB DDR3 Ram

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report