Vault General Discussion

Reply
Active Contributor
avaya2012
Posts: 48
Registered: ‎08-17-2012
Message 31 of 60 (652 Views)

Re: Error 1455 Follow up

11-09-2012 08:23 AM in reply to: scottmoyse

I found a consistency with this issue for me.  It seems to be occuring when I assign an item to a "standard part" like a steel angle, channel, or pipe that has multiple links.  We have an item number for each size of pipe rather than each length which will start to acquire many links.  If I go back and delete the link, sometimes even delete the the entire item, then reasign, it seems to correct the issue.  The assemblies I have bee working with are fairly simple so it is not a huge issue, just annoying.  In larger assemblies it gets to be more of an issue to track down the culprit but it always seems to be those "standard" items with multiple links.

 

Hopefully they find some type of fix to this.

Distinguished Contributor
SveinE
Posts: 446
Registered: ‎12-09-2003
Message 32 of 60 (644 Views)

Re: Error 1455 Follow up

11-12-2012 01:58 AM in reply to: avaya2012

Hi

 

Here we solved the error by "Fix" all dirty(*) files.

The Items that had this error was marked dirty, after fixing this we could update the Items...

Never seen dirty files produce error 1455 before though....

 

br

Svein

*Expert Elite*
scottmoyse
Posts: 1,605
Registered: ‎06-10-2009
Message 33 of 60 (640 Views)

Re: Error 1455 Follow up

11-12-2012 02:25 AM in reply to: SveinE

What do you mean by dirty files? the only time you should have dirty files is if there are dirty files on your local drive but not in Vault itself.

 

When I talk about dirty files I mean the ones with the exclamation mark inside a yellow dot/circle. You are using an * symbol which suggests you are talking about files with pending saves, but haven't been dirtied yet (if they are read only and are saved then they go from being marked with * to the yellow dot with the exclamation mark).

 

Are you suggesting that if I delete my locally saved (read only because its checked in) from my local drive the Items will update?

Cheers
Scott Moyse

Please use Mark Solutions!.Accept as Solution &Give Kudos!Kudos to further enhance the value of these forums. Cheers!


   

Distinguished Contributor
SveinE
Posts: 446
Registered: ‎12-09-2003
Message 34 of 60 (633 Views)

Re: Error 1455 Follow up

11-12-2012 05:55 AM in reply to: scottmoyse

Hi

 

Yes I mean files with an * symbol.

I guess there is/was an update that had to be done on the files.

We put the Items in Quick Changes state - Checked out - Save - *(gone) - Check in - Released - update Item  - ok

 

br

svein

 

Employee
KooCheeKit
Posts: 107
Registered: ‎10-28-2009
Message 35 of 60 (630 Views)

Re: Error 1455 Follow up

11-12-2012 06:27 AM in reply to: scottmoyse

Scott,

 

Was able to repro with your backup, will log an issue for further investigation.



Chee-Kit
Autodesk, Inc.

*Expert Elite*
scottmoyse
Posts: 1,605
Registered: ‎06-10-2009
Message 36 of 60 (626 Views)

Re: Error 1455 Follow up

11-12-2012 11:42 AM in reply to: KooCheeKit

ok thank you, I hope you & your team can work out a fix or work around.

Cheers
Scott Moyse

Please use Mark Solutions!.Accept as Solution &Give Kudos!Kudos to further enhance the value of these forums. Cheers!


   

*Expert Elite*
mthomas
Posts: 287
Registered: ‎06-17-2010
Message 37 of 60 (593 Views)

Re: Error 1455 Follow up

11-14-2012 06:09 AM in reply to: scottmoyse

Unfortunately removing all the local copies did not change anything in my case, nor checking out and resolving all the *.

 

Mike

Mike Thomas

Distinguished Contributor
SveinE
Posts: 446
Registered: ‎12-09-2003
Message 38 of 60 (586 Views)

Re: Error 1455

11-14-2012 05:39 PM in reply to: avaya2012
Sorry to hear that.
Hopefully Autodesk will find a solution soon.
Looks like there are more than one thing causing error 1455....

Br
Svein
*Expert Elite*
mthomas
Posts: 287
Registered: ‎06-17-2010
Message 39 of 60 (581 Views)

Re: Error 1455

11-15-2012 05:09 AM in reply to: SveinE

I take it back, this does work...

 

What I did differently this time was open the assembly and drawing and check everything out, whether it had the * or not. I saved and then when I checked it in I used the delete local copy option to remove the local copies. I was then able to update the item. 

 

I'm going to try this on some of the other items we have showing this error

 

Mike Thomas

*Expert Elite*
scottmoyse
Posts: 1,605
Registered: ‎06-10-2009
Message 40 of 60 (573 Views)

Re: Error 1455

11-15-2012 05:44 PM in reply to: mthomas

Ok, I've just realized this only happens when users check in the idw from the browser in Inventor without 'delete local copies' ticked. Inventor crashes just about everytime on those idw's. Its then the Item for the assembly the drawing is for that errors out on item update or creation.

 

If the idw does check in without crashing then the item updates perfectly.

 

They key to stopping the Inventor from crashing on idw check in is to tick that delete local copies box.

 

When Inventor crashes it must corrupt the BOM information for the assembly in some way. I've successfully reversed this issue on one dataset so I will try it on another later on.

 

I clicked when one of my staff said his inventor keeps crashing when checking in idws, i'd updated that Item a few days ago with no error, so I got him to update it and sure enough we got error 1455.

 

Great bit of community teamwork here guys. Loving it.

 

Cheers

 

SCott 

Cheers
Scott Moyse

Please use Mark Solutions!.Accept as Solution &Give Kudos!Kudos to further enhance the value of these forums. Cheers!


   

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
New button for Platinum & Gold Subscription customers
Gold & Platinum Subscription customers can alert Autodesk if they require assistance with their forum post

Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community