Utility Design General Discussion

Reply
Member
RichardChappell
Posts: 3
Registered: ‎11-13-2006
Message 1 of 14 (1,994 Views)

Roll Call

1994 Views, 13 Replies
04-01-2008 03:29 PM
How about users identifying themselves so we kknow about the community we're in? I'm Rick Chappell, from APS (Arizona Public Service) in Phoenix, AZ. We've just completed a pilot designed for underground residential. With the success we are getting ready to expand it for full underground development.
New Member
pearcerf
Posts: 1
Registered: ‎03-30-2006
Message 2 of 14 (1,994 Views)

Re: Roll Call

04-01-2008 04:01 PM in reply to: RichardChappell
Hello Richard,
My name is Ray Pearce with Municipal Light & Power in Anchorage, Alaska. We've been using AUD for two years now.
Member
RichardChappell
Posts: 3
Registered: ‎11-13-2006
Message 3 of 14 (1,994 Views)

Re: Roll Call

04-02-2008 08:49 AM in reply to: RichardChappell
Hi, Ray.
How many designers do you have using AUD? Have you been able to show a high ROI on you implementation?
New Member
josephpa
Posts: 1
Registered: ‎04-02-2008
Message 4 of 14 (1,994 Views)

Re: Roll Call

04-02-2008 04:12 PM in reply to: RichardChappell
Paul Joseph. Southern California Edison. We've been using the AUD product in residential tract design for 10+ years. We are currently expanding use to all distribution and (sub)transmission planning.
New Member
TERRY SCHUMACHER
Posts: 2
Registered: ‎04-04-2008
Message 5 of 14 (1,994 Views)

Re: Roll Call

04-04-2008 10:05 AM in reply to: RichardChappell
Hi Richard,
My name is Terry Schumacher, I work for the City of Redding, Ca. municipal electric utility.
We have been using this product since 1996, WAY before it was an Autodesk product.
We use this product for all types of Work Orders.
New Member
zebrachris
Posts: 1
Registered: ‎04-04-2008
Message 6 of 14 (1,994 Views)

Re: Roll Call

04-04-2008 10:46 PM in reply to: RichardChappell
Hello Richard. I'm Chris O'Neill - Puget Sound Energy, WA. We are new to AUD and have just finished our underground electric plat design system. Eventually we'll try to expand to overhead and gas as well.
Active Member
rrebich
Posts: 8
Registered: ‎10-02-2006
Message 7 of 14 (1,994 Views)

Re: Roll Call

04-07-2008 10:50 AM in reply to: RichardChappell
Ross Rebich, Idaho Power Co, Boise ID. We've been using AUD for over 10 years. We currently have 103 users who use AUD for all of their overhead and underground distribution design work.
Contributor
jpab
Posts: 17
Registered: ‎08-28-2003
Message 8 of 14 (1,994 Views)

Re: Roll Call

04-13-2008 05:42 PM in reply to: RichardChappell
Hello Richard,
My name is Jim Bower and I work for Connexus Energy in Minnesota, I am a past user of AUD when it was the Utility Design System (at Northern Virginia Electric Cooperative) My company is currently using Mirco Station which I hate and probably going to move to G-Electric, although I am trying to convince my boss to give AUD a try. Some of you may remember me from when I worked at Spatial Network Solutions :smileyhappy:
Member
pfr8es
Posts: 3
Registered: ‎04-18-2008
Message 9 of 14 (1,994 Views)

Re: Roll Call

04-18-2008 10:14 AM in reply to: RichardChappell
Hello Richard,
My name is Peter Frates and I work for the City of Healdsbrug, CA. I have been using AUD since 1995 and use it for all projects.
Valued Contributor
spatialnetbrek
Posts: 102
Registered: ‎12-08-2004
Message 10 of 14 (1,994 Views)

Re: Roll Call

05-16-2008 11:02 AM in reply to: RichardChappell
Hello Jim,

Good to see that you still keep tabs on the AUD world. Sorry to hear of your troubles with Microstation and hope you get to reclaim your status as the premier AUD'r.

Cheers,

Spatial Net Brek

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New Utility Design Category!

The Utility Design forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community