Moldflow Insight Forum
Welcome to Autodesk’s Moldflow Insight Forums. Share your knowledge, ask questions, and explore popular Moldflow Insight topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

dual domain and 3D image display difference

8 REPLIES 8
Reply
Message 1 of 9
kulandaivel_palanisamy
1083 Views, 8 Replies

dual domain and 3D image display difference

Hello all,

 

I am using Autodesk moldflow insight 2011.

Windows XP Professional x64 Service Pack 2.

 

I am facing display image difference between Dual domain and 3D images (normal and with result image) as shown below. some of my customers are questioning this problem.Please share your experiences.

dual domain and 3D display difference.jpg

 

Thanks in advance

JK

8 REPLIES 8
Message 2 of 9

In 3D meshed parts the 'gate' has to be part of the solid 3D model that is imported to moldflow.

In 3D mesh the 'gate' cannot be build in moldflow, while runner and sprue makes no problems as you can see in the picture above.

Message 3 of 9

Its just a glitch, Should be fixed in 2015 version.

Message 4 of 9
tim.vanast
in reply to: ben_mendenhall

Yep, it's a glitch.  The code calculates correctly but just displays it incorrectly.

Message 5 of 9
madhukeshwart
in reply to: tim.vanast

 This problem existing with mold flow since long & it is  expected  to be fixed with every time

they  release a new version. At least we expect it should be fixed in next service packs.

 

Even though it will calculates properly, but some time we feel difficult to convince the end user.

 

This visualization bug should be fixed at the earliest

Madhukeshwar Talwar

FORD MOTORS PRIVATE LIMITED, Chennai
mail: madhukeshwart@gmail.com
09600060862
======================================
Please use . Accept as Solution and Give Kudos as appropriate to further enhance these forums. Thank you! .....
Message 6 of 9

 

This issue seems to be fixed with latest Version of Synergy. Smiley Very Happy

You can close this Issue as accepted.

 

Regards,

Mayur

Message 7 of 9
Halasur
in reply to: mayur_dhumal

No not yet fixed

Message 8 of 9
raalteh
in reply to: Halasur

The display issue has been identified and should be availble in the next release.

 

As Tim mentioned in his response, the solver calculates it correctly, but the user interface had a problem.

Hanno van Raalte,

Product Manager - Injection Molding & Moldflow products
Message 9 of 9
madhukeshwart
in reply to: raalteh

It has been pending since long. Moldflow team should have taken on priority.

 

 

Madhukeshwar Talwar

FORD MOTORS PRIVATE LIMITED, Chennai
mail: madhukeshwart@gmail.com
09600060862
======================================
Please use . Accept as Solution and Give Kudos as appropriate to further enhance these forums. Thank you! .....

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report