Now i have newly installed the Autodesk simulation moldflow insight 2014 software . here in warpage result i found new option named shrinkage compensation
under this 4 option is there
i want warpage result including shrinkage value
then which option i need to select?
please anyone answer me...
thank you for your answer .
Solved! Go to Solution.
warpage result, deflection, is by default warpage and shrinkage.
The default Shrinkage Compensation: None, is the default warpage result as before, warp and shrinkage.
Regarding deflection plots, Properties, tab Deflection, and Shrinkage Compensation:
If you have run a Warp analysis in Autodesk Simulation Moldflow, and would like to view the results without the impact of shrinkage included
you can use Shrinkage Compensation
Hope this clarifies.
right, as I wrote:
"The default Shrinkage Compensation: None, is the default warpage result as before, warp and shrinkage."
Shrinkage Compensation: "None" is warpage and shrinkage, and "None" is default for the deflection plots.
So when you select the Deflection plot after completed warp simulation, without entering properites, the defaul result you see is as in previous releases of Insight,
deflection with warp and shrinkage.
you can find the information here:
If you look for information about Autodesk Simulation Moldflow, you can also start here.
You can then search for additional information in the search field, and step by step refine the search.
Hope this helps.